PartsTable
Technical Data Sheet
Download PDF

337899 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

337899: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include special_features: MONOCLONAL MOUSE ANTI-HUMAN REAGENT FOR IDENTIFCATION OF CELLS EXPRESSING CD22 ANTIGEN, part_name_assigned_by_controlling_agency: CD22 PE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-160-2172, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
337899
NSN: 5340-01-160-2172
NIINs: 011602172, 015560944
FSC: 5340 — Hardware, Commercial
CAGE: 11862 — GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT (USA)
SPECIFICATIONS
special_featuresMONOCLONAL MOUSE ANTI-HUMAN REAGENT FOR IDENTIFCATION OF CELLS EXPRESSING CD22 ANTIGEN
part_name_assigned_by_controlling_agencyCD22 PE
NSN5340-01-160-2172
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 337899 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.580 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
CENTER SECTION THICKNESS: 0.067 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.312 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
•
FIRST LEG CORNER RADIUS: 0.200 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 5.400 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.580 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
CENTER SECTION THICKNESS0.067 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.312 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
FIRST LEG CORNER RADIUS0.200 INCHES NOMINAL IN
SECOND LEG WIDTH5.400 INCHES NOMINAL IN
SECOND LEG LENGTH1.100 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLENO HOLE
SUBSTITUTES & CROSS-REFERENCES 1
15606502Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 337899?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 337899?
337899 is a BRACKET,DOUBLE ANGLE.
What parts can replace 337899?
There is 1 known substitute for 337899: 15606502. Substitute compatibility should be verified for your specific system.
What is the NSN for 337899?
337899 is cataloged in the U.S. Government catalog under NSN 5340-01-160-2172. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 337899