PartsTable
Technical Data Sheet
Download PDF

337462 — SPACER,SLEEVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

337462: SPACER,SLEEVE.

The SPACER,SLEEVE is a the manufacturer industrial component. Key specifications include radius: 0.500 INCHES NOMINAL IN, material: STEEL COMP 8630 OVERALL, tongue_width: 0.625 INCHES NOMINAL IN, style_designator: CONNECTOR, tongue_thickness: 0.125 INCHES NOMINAL IN, shank_overall_length: 1.170 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-200-4734, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
337462
NSN: 5340-00-200-4734
NIINs: 002004734, 016560256
FSC: 5340 — Hardware, Commercial
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
radius0.500 INCHES NOMINAL IN
materialSTEEL COMP 8630 OVERALL
tongue_width0.625 INCHES NOMINAL IN
style_designatorCONNECTOR
tongue_thickness0.125 INCHES NOMINAL IN
shank_overall_length1.170 INCHES NOMINAL IN
body_overall_diameter0.625 INCHES NOMINAL IN
shank_outside_diameter0.375 INCHES NOMINAL IN
metallic_hardness_rating27.0 MINIMUM ROCKWELL C AND 33.0 MAXIMUM ROCKWELL C
rod_connection_bore_depth1.170 INCHES NOMINAL IN
rod_connection_bore_diameter0.258 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
distance_from_end_to_hole_center1.750 INCHES NOMINAL IN
NSN5340-00-200-4734
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 337462 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE THICKNESS: 0.125 INCHES NOMINAL IN
•
TONGUE WIDTH: 0.625 INCHES NOMINAL IN
•
RADIUS: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CONNECTOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SHANK OUTSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
DISTANCE FROM END TO HOLE CENTER: 1.750 INCHES NOMINAL IN
•
SHANK OVERALL LENGTH: 1.170 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TONGUE THICKNESS0.125 INCHES NOMINAL IN
TONGUE WIDTH0.625 INCHES NOMINAL IN
RADIUS0.500 INCHES NOMINAL IN
STYLE DESIGNATORCONNECTOR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6050,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK OUTSIDE DIAMETER0.375 INCHES NOMINAL IN
DISTANCE FROM END TO HOLE CENTER1.750 INCHES NOMINAL IN
SHANK OVERALL LENGTH1.170 INCHES NOMINAL IN
ROD CONNECTION BORE DIAMETER0.258 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
ROD CONNECTION BORE DEPTH1.170 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
5340PL1019711Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 337462?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 337462?
337462 is a SPACER,SLEEVE.
What parts can replace 337462?
There is 1 known substitute for 337462: 5340PL1019711. Substitute compatibility should be verified for your specific system.
What is the NSN for 337462?
337462 is cataloged in the U.S. Government catalog under NSN 5340-00-200-4734. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 337462

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.