PartsTable
Technical Data Sheet
Download PDF

3373569 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

3373569: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, body_style: RECTANGULAR W/MOUNTING HOLES, body_width: 0.187 INCHES NOMINAL IN, body_height: 0.500 INCHES NOMINAL IN, body_length: 0.500 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-285-9878, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3373569
NSN: 5330-00-285-9878
NIINs: 002859878, 004223450
FSC: 5330 — Packing and Gasket Materials
CAGE: 55380 — HATCH & KIRK, INC. (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
body_styleRECTANGULAR W/MOUNTING HOLES
body_width0.187 INCHES NOMINAL IN
body_height0.500 INCHES NOMINAL IN
body_length0.500 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length0.035 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
overall_width0.187 INCHES NOMINAL IN
overall_height0.500 INCHES NOMINAL IN
overall_length0.535 INCHES NOMINAL IN
shaft_diameter0.078 INCHES NOMINAL IN
NSN5330-00-285-9878
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3373569 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.078 INCHES NOMINAL IN
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 417,GR SC620 MIL STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
CENTER HOLE DIAMETER: 0.594 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.078 INCHES NOMINAL IN
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION417,GR SC620 MIL STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEO-RING
CENTER HOLE DIAMETER0.594 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
3303080Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 3373569?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3373569?
3373569 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3373569?
There is 1 known substitute for 3373569: 3303080. Substitute compatibility should be verified for your specific system.
What is the NSN for 3373569?
3373569 is cataloged in the U.S. Government catalog under NSN 5330-00-285-9878. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3373569