PartsTable
Technical Data Sheet
Download PDF

336D950G01 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

336D950G01: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 1.920 INCHES NOMINAL IN, height: 1.880 INCHES NOMINAL IN, length: 3.000 INCHES NOMINAL IN, material: ALUMINUM ALLOY 356.0, hole_diameter: 0.384 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN, furnished_items: LOCKNUT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-225-7757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
336D950G01
NSN: 5340-00-225-7757
FSC: 5340 — Hardware, Commercial
CAGE: 48306 — NORTHROP GRUMMAN SUPPORT SERVICES CORP (USA)
SPECIFICATIONS
width1.920 INCHES NOMINAL IN
height1.880 INCHES NOMINAL IN
length3.000 INCHES NOMINAL IN
materialALUMINUM ALLOY 356.0
hole_diameter0.384 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
furnished_itemsLOCKNUT
nominal_thread_size0.375 INCHES IN
thread_series_designatorUNF
material_document_and_classificationQQ-A-601,ALLOY 356,TEMPER 6 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-225-7757
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 336D950G01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 3.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-601,ALLOY 356,TEMPER 6 FED SPEC SINGLE MATERIAL RESPONSE
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
HEIGHT: 1.880 INCHES NOMINAL IN
•
WIDTH: 1.920 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 356.0
•
THREAD SERIES DESIGNATOR: UNF
•
FURNISHED ITEMS: LOCKNUT
TECHNICAL CHARACTERISTICS
LENGTH3.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-601,ALLOY 356,TEMPER 6 FED SPEC SINGLE MATERIAL RESPONSE
NOMINAL THREAD SIZE0.375 INCHES IN
HEIGHT1.880 INCHES NOMINAL IN
WIDTH1.920 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 356.0
THREAD SERIES DESIGNATORUNF
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.384 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 336D950G01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 336D950G01?
336D950G01 is a CLAMP,SYNCHRO.
What is the NSN for 336D950G01?
336D950G01 is cataloged in the U.S. Government catalog under NSN 5340-00-225-7757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 336D950G01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.