PartsTable
Technical Data Sheet
PartsTable / MRO / 336758
336758 ✓ Verified by PartsTable
Intellinet · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

Trusted connections for your network_x000D_<br>_x000D_<br>Enjoy clear and secure data transmissions with the Intellinet Solutions Cat6 Patch Cable. This network cable enables a convenient and reliable connection from one network device, such as a switch, modem or router, to another or to the infrastructure at large through a patch panel, keystone jack or wall outlet. Designed to meet the appropriate TIA/EIA standards and suitable for use in 10/100/1000BASE-T networks, the Intellinet Solutions Cat6 Patch Cable also offers a rugged PVC sheath and moulded strain relief to help reduce cable damage and assure full data transfer rates, error-free transmissions and maximum conductivity.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-604-4409, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 336758
NSN: 4720-00-604-4409
FSC: 4720
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
body_styleW/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS
seat_angle37.0 DEGREES FIRST END
body_length0.359 INCHES NOMINAL IN
temp_rating450.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
exterior_colorNATURAL
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.312 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.430 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
thread_directionRIGHT-HAND FIRST END
features_providedNUTS DRILLED FOR LOCKWIRE
NSN4720-00-604-4409
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 336758 · Intellinet ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
INSIDE SURFACE CONDITION: SMOOTH
•
OUTER COVERING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
•
THREAD SERIES DESIGNATOR: UNF FIRST END
•
BURST TEST PRESSURE: 9000.0 POUNDS PER SQUARE INCH LBS
•
OUTSIDE DIAMETER: 0.430 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
•
MEASURING METHOD AND LENGTH: 18.000 INCHES MINIMUM OVERALL AND 18.500 INCHES MAXIMUM OVERALL IN
•
HYDROSTATIC TEST PRESSURE: 4500.0 POUNDS PER SQUARE INCH LBS
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SEAT ANGLE37.0 DEGREES FIRST END
INSIDE SURFACE CONDITIONSMOOTH
OUTER COVERING ENVIRONMENTAL PROTECTIONCORROSION RESISTANT
THREAD SERIES DESIGNATORUNF FIRST END
BURST TEST PRESSURE9000.0 POUNDS PER SQUARE INCH LBS
OUTSIDE DIAMETER0.430 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
MEASURING METHOD AND LENGTH18.000 INCHES MINIMUM OVERALL AND 18.500 INCHES MAXIMUM OVERALL IN
HYDROSTATIC TEST PRESSURE4500.0 POUNDS PER SQUARE INCH LBS
TEMP RATING450.0 FAHRENHEIT SINGLE RESPONSE DEGF
THREAD DIRECTIONRIGHT-HAND FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
93002Interchangeable
interchangeable cross-reference
interchangeable
1093395Interchangeable
interchangeable cross-reference
interchangeable
1092855Interchangeable
interchangeable cross-reference
interchangeable
1091979G1Interchangeable
interchangeable cross-reference
interchangeable
85910-0251-0001Interchangeable
interchangeable cross-reference
interchangeable
9746498Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 336758?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 336758?
336758 is a CAPACITOR,FIXED,CERAMIC DIELECTR manufactured by Intellinet. It is classified as a MRO (MRO_GENERAL).
What parts can replace 336758?
There are 17 known substitutes for 336758: 93002, 1093395, 1092855 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 336758?
336758 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-604-4409. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 336758

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026