PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 33617
33617 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONTACT STRIP,RADIO FREQUENCY GR. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, housing_bore_diameter: 2.623 INCHES NOMINAL IN, sealing_element_style: VERTICAL, accommodated_shaft_diameter: 1.687 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-122-0528, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
33617
NSN: 5330-00-122-0528
FSC: 5330
CAGE: 0L8N4 — AMFS AMERICAN FLEET SERVICES (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.375 INCHES NOMINAL IN
housing_bore_diameter2.623 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.687 INCHES NOMINAL IN
NSN5330-00-122-0528
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 33617 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.625 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT DIAMETER: 1.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
SEAL WIDTH0.375 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.625 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER1.625 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
33617Interchangeable
interchangeable cross-reference
interchangeable
33301Interchangeable
interchangeable cross-reference
interchangeable
440265S60Interchangeable
interchangeable cross-reference
interchangeable
41SX294Interchangeable
interchangeable cross-reference
interchangeable
801077Interchangeable
interchangeable cross-reference
interchangeable
1949618Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 33617?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 33617?
33617 is a CONTACT STRIP,RADIO FREQUENCY GR.
What parts can replace 33617?
There are 6 known substitutes for 33617: 33617, 33301, 440265S60 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 33617?
33617 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-122-0528. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 33617

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026