PartsTable
Technical Data Sheet
Download PDF

336064R1 — FLANGE,PIPE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

336064R1: FLANGE,PIPE.

The FLANGE,PIPE is a the manufacturer industrial component. Key specifications include material: STEEL, thickness: 1.520 INCHES NOMINAL IN, flange_width: 8.062 INCHES NOMINAL IN, recess_depth: 0.355 INCHES NOMINAL IN, flange_length: 6.000 INCHES NOMINAL IN, recess_diameter: 4.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-111-5224, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
336064R1
NSN: 4730-00-111-5224
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 29510 — KOMATSU AMERICAN INTL CO (USA)
SPECIFICATIONS
materialSTEEL
thickness1.520 INCHES NOMINAL IN
flange_width8.062 INCHES NOMINAL IN
recess_depth0.355 INCHES NOMINAL IN
flange_length6.000 INCHES NOMINAL IN
recess_diameter4.032 INCHES NOMINAL IN
special_featuresFURNISHED WITH BOLTS AND LOCK WASHERS,FOUR EACH
style_designatorBOLT HOLE CONNECTOR PLATE
surface_treatmentZINC
bolt_hole_diameter0.656 INCHES NOMINAL IN
flange_section_styleRAISED FACED, DISHED
face_seating_surface_conditionMACHINED
NSN4730-00-111-5224
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 336064R1 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FACE SEATING SURFACE CONDITION: MACHINED
•
FLANGE SECTION STYLE: RAISED FACED, DISHED
•
STYLE DESIGNATOR: BOLT HOLE CONNECTOR PLATE
•
BOLT HOLE DIAMETER: 0.656 INCHES NOMINAL IN
•
RECESS DEPTH: 0.355 INCHES NOMINAL IN
•
FLANGE LENGTH: 6.000 INCHES NOMINAL IN
•
RECESS DIAMETER: 4.032 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 4.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FACE SEATING SURFACE CONDITIONMACHINED
FLANGE SECTION STYLERAISED FACED, DISHED
STYLE DESIGNATORBOLT HOLE CONNECTOR PLATE
BOLT HOLE DIAMETER0.656 INCHES NOMINAL IN
RECESS DEPTH0.355 INCHES NOMINAL IN
FLANGE LENGTH6.000 INCHES NOMINAL IN
RECESS DIAMETER4.032 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH4.188 INCHES NOMINAL IN
SPECIAL FEATURESFURNISHED WITH BOLTS AND LOCK WASHERS,FOUR EACH
SURFACE TREATMENTZINC
SUBSTITUTES & CROSS-REFERENCES 2
48SF6Reference document
Same NSN cross-reference
Reference document — Secondary reference
161586Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 336064R1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 336064R1?
336064R1 is a FLANGE,PIPE.
What parts can replace 336064R1?
There are 2 known substitutes for 336064R1: 48SF6, 161586. Substitute compatibility should be verified for your specific system.
What is the NSN for 336064R1?
336064R1 is cataloged in the U.S. Government catalog under NSN 4730-00-111-5224. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 336064R1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.