PartsTable
Technical Data Sheet
Download PDF

336-190-224 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

336-190-224: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, special_features: UNDERWATER LIFE SUPPORT IAW NAVSEA INSTRUCTION 10560.2B, center_hole_diameter: 65.1 MILLIMETERS MINIMUM AND 65.9 MILLIMETERS MAXIMUM MM, cross-sectional_height: 1.27 MILLIMETERS MINIMUM AND 1.43 MILLIMETERS MAXIMUM MM, end_item_identification: MK20MOD0 DIVING SYS, criticality_code_justification: FEAT. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-416-9425, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
336-190-224
NSN: 5331-01-416-9425
NIINs: 014169425, 014241865
FSC: 5331 — O-ring
CAGE: 47432 — INTERSPIRO INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
special_featuresUNDERWATER LIFE SUPPORT IAW NAVSEA INSTRUCTION 10560.2B
center_hole_diameter65.1 MILLIMETERS MINIMUM AND 65.9 MILLIMETERS MAXIMUM MM
cross-sectional_height1.27 MILLIMETERS MINIMUM AND 1.43 MILLIMETERS MAXIMUM MM
end_item_identificationMK20MOD0 DIVING SYS
criticality_code_justificationFEAT
NSN5331-01-416-9425
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 336-190-224 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 1.27 MILLIMETERS MINIMUM AND 1.43 MILLIMETERS MAXIMUM MM
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
CENTER HOLE DIAMETER: 65.1 MILLIMETERS MINIMUM AND 65.9 MILLIMETERS MAXIMUM MM
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT1.27 MILLIMETERS MINIMUM AND 1.43 MILLIMETERS MAXIMUM MM
CRITICALITY CODE JUSTIFICATIONFEAT
SPECIAL FEATURESUNDERWATER LIFE SUPPORT IAW NAVSEA INSTRUCTION 10560.2B
CENTER HOLE DIAMETER65.1 MILLIMETERS MINIMUM AND 65.9 MILLIMETERS MAXIMUM MM
END ITEM IDENTIFICATIONMK20MOD0 DIVING SYS
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 2
470-0125Reference document
Same NSN cross-reference
Reference document — Informative reference only
DE995Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 336-190-224?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 336-190-224?
336-190-224 is a O-RING.
What parts can replace 336-190-224?
There are 2 known substitutes for 336-190-224: 470-0125, DE995. Substitute compatibility should be verified for your specific system.
What is the NSN for 336-190-224?
336-190-224 is cataloged in the U.S. Government catalog under NSN 5331-01-416-9425. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 336-190-224