PartsTable
Technical Data Sheet
PartsTable / MRO / 3358
3358 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: STEEL COMP 316, tip_type: BEVELED, thickness: 0.062 INCHES NOMINAL IN, body_style: PANEL MOUNT, head_style: FLAT COUNTERSUNK, ring_style: CONCENTRIC. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-010-0870, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3358
NSN: 5305-00-010-0870
FSC: 5305
CAGE: 40152 — VME AMERICAS INC SUB OF VME GROUP N V (USA)
SPECIFICATIONS
materialSTEEL COMP 316
tip_typeBEVELED
thickness0.062 INCHES NOMINAL IN
body_stylePANEL MOUNT
head_styleFLAT COUNTERSUNK
ring_styleCONCENTRIC
shell_typeSOLID
joint_styleSTEP JOINT
garment_size6-3/4 TO 7-1/2
thread_class2A A
head_diameter0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
hole_diameter0.115 INCHES NOMINAL IN
NSN5305-00-010-0870
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3358 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD DIAMETER: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 32
•
THREAD SERIES DESIGNATOR: UNF
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
THREAD LENGTH: 0.634 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
HEAD DIAMETER0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH32
THREAD SERIES DESIGNATORUNF
FASTENER LENGTH0.750 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2S STYLE
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD LENGTH0.634 INCHES MINIMUM IN
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
100870Interchangeable
interchangeable cross-reference
interchangeable
7206Interchangeable
interchangeable cross-reference
interchangeable
30206Interchangeable
interchangeable cross-reference
interchangeable
989108-36BInterchangeable
interchangeable cross-reference
interchangeable
17141Interchangeable
interchangeable cross-reference
interchangeable
LNS136-3ALT1PC12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3358?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3358?
3358 is a CONNECTOR,RECEPTACLE,ELECTRICAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3358?
There are 17 known substitutes for 3358: 100870, 7206, 30206 and 14 more. Substitute compatibility should be verified for your specific system.
Is 3358 still available?
3358 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3358

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026