PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 335751
335751 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CASE ASSEMBLY is a the manufacturer industrial component. Key specifications include end_item_identification: ACFT ENG R2000. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-229-3666, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
335751
NSN: 5330-00-229-3666
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
end_item_identificationACFT ENG R2000
general_characteristics_item_descriptionCONSISTS OF CASE NUMBER 102488 AND STUD PART NUMBERS AND LENGTH; 18515 4.453 IN.,18517 5.313 IN.,11345 0.938 IN.,38299 0.75 IN.,141375 5.647 IN.,43057 3.266 IN.,26056 0.438 IN. AND 96282 0.27 IN. IN
NSN5330-00-229-3666
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 335751 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.406 INCHES NOMINAL IN
•
RETAINER THICKNESS: 0.051 INCHES NOMINAL IN
•
MATERIAL: STEEL RETAINER
•
SURFACE TREATMENT: CADMIUM RETAINER
•
CONSTRUCTION: ONE-PIECE
•
PACKING INSIDE DIAMETER: 0.133 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.406 INCHES NOMINAL IN
RETAINER THICKNESS0.051 INCHES NOMINAL IN
MATERIALSTEEL RETAINER
SURFACE TREATMENTCADMIUM RETAINER
MATERIALRUBBER SYNTHETIC PACKING
CONSTRUCTIONONE-PIECE
PACKING INSIDE DIAMETER0.133 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
7500-6Interchangeable
interchangeable cross-reference
interchangeable
1000-0125-2Interchangeable
interchangeable cross-reference
interchangeable
19B209105P12Interchangeable
interchangeable cross-reference
interchangeable
335751Interchangeable
interchangeable cross-reference
interchangeable
25030-0002Interchangeable
interchangeable cross-reference
interchangeable
1494ND5110Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 335751?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 335751?
335751 is a CASE ASSEMBLY.
What parts can replace 335751?
There are 8 known substitutes for 335751: 7500-6, 1000-0125-2, 19B209105P12 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 335751?
335751 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-229-3666. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 335751

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026