335-16111-0 — NUT,PLAIN,HEXAGON

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

335-16111-0: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: HEXAGON, nut_height: 0.210 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-467-2433, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

335-16111-0

NSN: 5310-01-467-2433
FSC: 5310 — Nuts and Washers
CAGE: 9F512 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV HYDRAULIC PUMP DIVISION (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING OVERALL
nut_style	HEXAGON
nut_height	0.210 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
thread_class	2B
thread_series	UNIFIED NATIONAL COARSE (UNC)
thread_direction	RIGHT-HAND
width_across_flats	0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
nominal_thread_size	0.375 INCHES IN
bearing_surface_type	CHAMFERED
end_item_identification	TRANS:WSD;NIMITZ CLASS CVN
thread_quantity_per_inch	16
NSN	5310-01-467-2433

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN

•

THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.375 INCHES IN

•

NUT HEIGHT: 0.210 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN

•

NUT STYLE: HEXAGON

•

THREAD CLASS: 2B

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
THREAD SERIES	UNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.375 INCHES IN
NUT HEIGHT	0.210 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
NUT STYLE	HEXAGON
THREAD CLASS	2B
END ITEM IDENTIFICATION	TRANS:WSD;NIMITZ CLASS CVN
THREAD QUANTITY PER INCH	16
MATERIAL	STEEL CORROSION RESISTING OVERALL

SUBSTITUTES & CROSS-REFERENCES 6

B18.2.2Reference document

Same NSN cross-reference

Reference document — Secondary reference

M19-21121Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

PL-M19-21121-D PC 158Reference document

Same NSN cross-reference

Reference document — Secondary reference

M19-21121-D PC 158Reference document

Same NSN cross-reference

Reference document — Secondary reference

335-16111Reference document

Same NSN cross-reference

Reference document — Secondary reference

M19-20873 PC NO 286Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 335-16111-0?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 335-16111-0?

335-16111-0 is a NUT,PLAIN,HEXAGON.

What parts can replace 335-16111-0?

There are 6 known substitutes for 335-16111-0: B18.2.2, M19-21121, PL-M19-21121-D PC 158 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 335-16111-0?

335-16111-0 is cataloged in the U.S. Government catalog under NSN 5310-01-467-2433. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

335-16111-0 — NUT,PLAIN,HEXAGON

Request a Quote — 335-16111-0