PartsTable
Technical Data Sheet
Download PDF

33484 — BEARING,PLAIN,ROD END

✓ Government record, cited
Lindy · BALL BEARING
PRODUCT OVERVIEW

33484: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a Lindy industrial component. Key specifications include outside_diameter: 2.812 INCHES NOMINAL IN, special_features: ATTACHMENT METHOD: SETSCREWS, style_designator: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-442-1670, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
33484
NSN: 3120-00-442-1670
NIINs: 004421670, 004900546, 011177441, 013120627
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 09455 — RBC TRANSPORT DYNAMICS CORP DIV RBC TRANSPORT DYNAMICS (USA)
SPECIFICATIONS
outside_diameter2.812 INCHES NOMINAL IN
special_featuresATTACHMENT METHOD: SETSCREWS
style_designatorROUND
mounting_hole_quantity2
NSN3120-00-442-1670
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 33484 · Lindy ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK THREAD LENGTH: 1.9370 INCHES NOMINAL IN
•
BORE CENTER TO SHANK END DISTANCE: 3.0520 INCHES MINIMUM AND 3.0720 INCHES MAXIMUM IN
•
INNER MEMBER WIDTH: 0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
•
OUTER MEMBER WIDTH: 0.5720 INCHES MINIMUM AND 0.5820 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BALL TYPE
•
THREAD DIAMETER: 0.625 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SHANK THREAD LENGTH1.9370 INCHES NOMINAL IN
BORE CENTER TO SHANK END DISTANCE3.0520 INCHES MINIMUM AND 3.0720 INCHES MAXIMUM IN
INNER MEMBER WIDTH0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
OUTER MEMBER WIDTH0.5720 INCHES MINIMUM AND 0.5820 INCHES MAXIMUM IN
STYLE DESIGNATORBALL TYPE
THREAD DIAMETER0.625 INCHES NOMINAL IN
OVERALL LENGTH3.9220 INCHES MINIMUM AND 3.9520 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
SHANK STYLEEXTERNALLY THREADED
SPECIAL FEATURESKEYWAY IN SHANK
SUBSTITUTES & CROSS-REFERENCES 1
177172Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 33484?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 33484?
33484 is a BEARING,PLAIN,ROD END manufactured by Lindy.
What parts can replace 33484?
There is 1 known substitute for 33484: 177172. Substitute compatibility should be verified for your specific system.
What is the NSN for 33484?
33484 is cataloged in the U.S. Government catalog under NSN 3120-00-442-1670. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 33484

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.