PartsTable
Technical Data Sheet
PartsTable / MRO / 33461
33461 ✓ Verified by PartsTable
Lindy · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

6 Pin Mini DIN Male to 6 Pin Mini DIN Female<br>Fully moulded<br>10 year warranty. Key specifications include material: STEEL OVERALL, overall_width: 0.9375 INCHES NOMINAL IN, outside_diameter: 4.6250 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, backface_corner_radius: 0.0300 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-024-5879, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 33461
NSN: 3110-00-024-5879
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.9375 INCHES NOMINAL IN
outside_diameter4.6250 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
backface_corner_radius0.0300 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
reference_number_differentiating_characteristicsMAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATION AND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTED FIELD
NSN3110-00-024-5879
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 33461 · Lindy ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
•
BACKFACE CORNER RADIUS: 0.0300 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
OUTSIDE DIAMETER: 4.6250 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.9375 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
BACKFACE CORNER RADIUS0.0300 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
OUTSIDE DIAMETER4.6250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
ST4-10-90DEGREES-ETInterchangeable
interchangeable cross-reference
interchangeable
MS20659-141Interchangeable
interchangeable cross-reference
interchangeable
AS20659Interchangeable
interchangeable cross-reference
interchangeable
33461Interchangeable
interchangeable cross-reference
interchangeable
33461-3Interchangeable
interchangeable cross-reference
interchangeable
352250022979Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 33461?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 33461?
33461 is a CAPACITOR,FIXED,METALLIZED,PAPER manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 33461?
There are 10 known substitutes for 33461: ST4-10-90DEGREES-ET, MS20659-141, AS20659 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 33461?
33461 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-024-5879. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 33461

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026