PartsTable
Technical Data Sheet
33454 ✓ Verified by PartsTable
Lindy · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Secure connection to a SATA device and controller!<br>- SATA 1.0a and SATA II compatible<br>- Straight to right angle latch type SATA plugs which lock into place when used with compatible latching controller or device ports<br>- Can also be used with standard non-latching SATA ports. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-111-3747, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
33454
NSN: 5331-00-111-3747
FSC: 5331 — O-RING
CAGE: 07180 — SPECTRUM MICROWAVE, INC. (USA)
SPECIFICATIONS
width2.000 INCHES NOMINAL IN
length10.500 INCHES NOMINAL IN
materialNICKEL ALLOY OVERALL
valve_size10.000 INCHES IN
bonnet_typeOUTSIDE SCREW-YOKE
flange_shapeROUND WITH HOLES ALL ENDS
pointer_typeINDICATING SINGLE POINTER
connection_typeFLANGE ALL ENDS
pointer_purposeOPEN/CLOSED
special_featuresHOLE FOR PINNING
style_designatorPLAIN FLANGED
mounting_facilityBRACKET(S)
NSN5331-00-111-3747
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 33454 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER: 1.475 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER: 1.675 INCHES MINIMUM AND 1.711 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER1.475 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER1.675 INCHES MINIMUM AND 1.711 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
5122883Interchangeable
interchangeable cross-reference
interchangeable
33454Interchangeable
interchangeable cross-reference
interchangeable
33454 REV 0 FIND 3Interchangeable
interchangeable cross-reference
interchangeable
14039-1Interchangeable
interchangeable cross-reference
interchangeable
273505760051355Interchangeable
interchangeable cross-reference
interchangeable
14038-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 33454?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 33454?
33454 is a SHAFT AND CARRIER,GOVERNOR manufactured by Lindy.
What parts can replace 33454?
There are 21 known substitutes for 33454: 5122883, 33454, 33454 REV 0 FIND 3 and 18 more. Substitute compatibility should be verified for your specific system.
Is 33454 still available?
33454 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 33454