PartsTable
Technical Data Sheet
Download PDF

334-1509-00 — NUT,PLAIN,RECTANGULAR

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

334-1509-00: NUT,PLAIN,RECTANGULAR.

The NUT,PLAIN,RECTANGULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020 OVERALL, nut_style: PLAIN, RECTANGULAR, nut_width: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN, nut_height: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, nut_length: 1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-335-0051, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
334-1509-00
NSN: 5310-00-335-0051
FSC: 5310 — Nuts and Washers
CAGE: 95105 — ROCKWELL COLLINS, INC. DIV COLLINS AEROSPACE - MISSION SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP 1020 OVERALL
nut_stylePLAIN, RECTANGULAR
nut_width0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
nut_height0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
nut_length1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
special_featuresHELICAL COMPRESSION SPRING ATTACHED,
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
nominal_thread_size0.500 INCHES IN
thread_quantity_per_inch13
NSN5310-00-335-0051
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 334-1509-00 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT WIDTH: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
•
NUT LENGTH: 1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-635 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NUT HEIGHT: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
NUT WIDTH0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
NUT LENGTH1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-Z-325 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-635 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NUT HEIGHT0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
SPECIAL FEATURESHELICAL COMPRESSION SPRING ATTACHED,
SURFACE TREATMENTZINC OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
8042743Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
334-1397-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
13217E1039-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
67A274C15-2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
334-1397-000Reference document
Same NSN cross-reference
Reference document — Secondary reference
P1010EGReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 334-1509-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 334-1509-00?
334-1509-00 is a NUT,PLAIN,RECTANGULAR.
What parts can replace 334-1509-00?
There are 6 known substitutes for 334-1509-00: 8042743, 334-1397-00, 13217E1039-1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 334-1509-00?
334-1509-00 is cataloged in the U.S. Government catalog under NSN 5310-00-335-0051. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 334-1509-00

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.