PartsTable
Technical Data Sheet
Download PDF

334-0067-000 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

334-0067-000: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: CLINCH, nut_height: 0.150 INCHES NOMINAL IN, nut_diameter: 0.313 INCHES NOMINAL IN, pilot_length: 0.087 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-680-5754, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
334-0067-000
NSN: 5310-00-680-5754
FSC: 5310 — Nuts and Washers
CAGE: 13499 — ROCKWELL COLLINS, INC. DBA COLLINS AEROSPACE GOVERNMENT SYSTEMS DIV COLLINS AEROSPACE - GOVERNMENT SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleCLINCH
nut_height0.150 INCHES NOMINAL IN
nut_diameter0.313 INCHES NOMINAL IN
pilot_length0.087 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.187 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
nominal_thread_size0.138 INCHES IN
thread_quantity_per_inch32
NSN5310-00-680-5754
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 334-0067-000 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
NUT DIAMETER: 0.313 INCHES NOMINAL IN
•
PILOT DIAMETER: 0.187 INCHES NOMINAL IN
•
PILOT LENGTH: 0.087 INCHES NOMINAL IN
•
NUT HEIGHT: 0.150 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.138 INCHES IN
NUT DIAMETER0.313 INCHES NOMINAL IN
PILOT DIAMETER0.187 INCHES NOMINAL IN
PILOT LENGTH0.087 INCHES NOMINAL IN
NUT HEIGHT0.150 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
NUT STYLECLINCH
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 3
10630032-21Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
33A19-632-3AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5165354Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 334-0067-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 334-0067-000?
334-0067-000 is a NUT,PLAIN,CLINCH.
What parts can replace 334-0067-000?
There are 3 known substitutes for 334-0067-000: 10630032-21, 33A19-632-3A, 5165354. Substitute compatibility should be verified for your specific system.
What is the NSN for 334-0067-000?
334-0067-000 is cataloged in the U.S. Government catalog under NSN 5310-00-680-5754. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 334-0067-000

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.