PartsTable
Technical Data Sheet
Download PDF

333C515U03 NON-ASBESTOS — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

333C515U03 NON-ASBESTOS: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include outside_diameter: 1.188 INCHES NOMINAL IN, special_features: CONTAINS NON-ASBESTOS MATERIAL, style_designator: CIRCULAR, aperture_diameter: 0.719 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN, cross-sectional_thickness: 0.016 INCHES NOMINAL IN, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTS. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-441-6418, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
333C515U03 NON-ASBESTOS
NSN: 5330-01-441-6418
FSC: 5330 — Packing and Gasket Materials
CAGE: 22375 — FISCHER AND PORTER CO (USA)
SPECIFICATIONS
outside_diameter1.188 INCHES NOMINAL IN
special_featuresCONTAINS NON-ASBESTOS MATERIAL
style_designatorCIRCULAR
aperture_diameter0.719 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN
cross-sectional_thickness0.016 INCHES NOMINAL IN
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-441-6418
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 333C515U03 NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 1.188 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.719 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER1.188 INCHES NOMINAL IN
APERTURE DIAMETER0.719 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN
SPECIAL FEATURESCONTAINS NON-ASBESTOS MATERIAL
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
SUBSTITUTES & CROSS-REFERENCES 1
333C515U03Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 333C515U03 NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 333C515U03 NON-ASBESTOS?
333C515U03 NON-ASBESTOS is a GASKET.
What parts can replace 333C515U03 NON-ASBESTOS?
There is 1 known substitute for 333C515U03 NON-ASBESTOS: 333C515U03. Substitute compatibility should be verified for your specific system.
What is the NSN for 333C515U03 NON-ASBESTOS?
333C515U03 NON-ASBESTOS is cataloged in the U.S. Government catalog under NSN 5330-01-441-6418. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 333C515U03 NON-ASBESTOS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.