PartsTable
Technical Data Sheet
PartsTable / MRO / 33341
33341 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include material: STEEL, bore_shape: STRAIGHT, design_type: NONREUSABLE, body_diameter: 3.812 INCHES NOMINAL IN, bore_diameter: 0.1250 INCHES NOMINAL IN, overall_width: 0.1562 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-057-0574, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 33341
NSN: 3110-00-057-0574
FSC: 3110
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialSTEEL
bore_shapeSTRAIGHT
design_typeNONREUSABLE
body_diameter3.812 INCHES NOMINAL IN
bore_diameter0.1250 INCHES NOMINAL IN
overall_width0.1562 INCHES NOMINAL IN
flow_directionINSIDE OUT
load_directionRADIAL
overall_length2.50 INCHES NOMINAL IN
surface_finishGROUND
overall_diameter1.1875 INCHES NOMINAL IN
style_designatorCYLINDRICAL W/ INTEGRAL OUTER CASING
NSN3110-00-057-0574
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 33341 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
LUBRICATION MATERIAL: GREASE
•
BORE SHAPE: STRAIGHT
•
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0006 INCHES MAXIMUM RADIAL IN
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
OVERALL WIDTH0.1562 INCHES NOMINAL IN
SURFACE FINISHGROUND
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
LUBRICATION MATERIALGREASE
BORE SHAPESTRAIGHT
INTERNAL CLEARANCE0.0001 INCHES MINIMUM RADIAL AND 0.0006 INCHES MAXIMUM RADIAL IN
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
1623410-109Interchangeable
interchangeable cross-reference
interchangeable
802083Interchangeable
interchangeable cross-reference
interchangeable
5183128000Interchangeable
interchangeable cross-reference
interchangeable
702251C1Interchangeable
interchangeable cross-reference
interchangeable
33341Interchangeable
interchangeable cross-reference
interchangeable
11B5190004-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 33341?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 33341?
33341 is a RESISTOR,FIXED,COMPOSITION. It is classified as a MRO (MRO_GENERAL).
What parts can replace 33341?
There are 6 known substitutes for 33341: 1623410-109, 802083, 5183128000 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 33341?
33341 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-057-0574. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 33341

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026