PartsTable
Technical Data Sheet
Download PDF

33301061P1 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

33301061P1: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, second_end_style: RADIUS, features_provided: CASEHARDENED, surface_treatment: CADMIUM OVERALL, pin_overall_length: 1.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-725-7167, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
33301061P1
NSN: 5315-00-725-7167
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 3B150 — RAYTHEON COMPANY DBA RAYTHEON CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
second_end_styleRADIUS
features_providedCASEHARDENED
surface_treatmentCADMIUM OVERALL
pin_overall_length1.250 INCHES NOMINAL IN
pin_overall_diameter0.2500 INCHES NOMINAL IN
first_end_taper_angle12.0 DEGREES NOMINAL
first_end_taper_length0.125 INCHES NOMINAL IN
second_end_corner_radius0.0625 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-00-725-7167
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 33301061P1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.125 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 12.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.2500 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 1.250 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
FEATURES PROVIDED: CASEHARDENED
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.125 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE12.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.2500 INCHES NOMINAL IN
PIN OVERALL LENGTH1.250 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
FEATURES PROVIDEDCASEHARDENED
SURFACE TREATMENTCADMIUM OVERALL
SECOND END STYLERADIUS
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
708201Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 33301061P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 33301061P1?
33301061P1 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 33301061P1?
There is 1 known substitute for 33301061P1: 708201. Substitute compatibility should be verified for your specific system.
What is the NSN for 33301061P1?
33301061P1 is cataloged in the U.S. Government catalog under NSN 5315-00-725-7167. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 33301061P1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.