PartsTable
Technical Data Sheet
Download PDF

332C446P143 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

332C446P143: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, first_leg_length: 0.697 INCHES MINIMUM AND 0.709 INCHES MAXIMUM IN, second_leg_width: 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-152-7693, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
332C446P143
NSN: 5340-01-152-7693
FSC: 5340 — Hardware, Commercial
CAGE: 05053 — L&E ENGINEERING, LLC (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
first_leg_length0.697 INCHES MINIMUM AND 0.709 INCHES MAXIMUM IN
second_leg_width0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length1.357 INCHES MINIMUM AND 1.369 INCHES MAXIMUM IN
mounting_hole_typePLAIN
first_leg_thickness0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
first_leg_end_radius0.420 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
second_leg_thickness0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
NSN5340-01-152-7693
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 332C446P143 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.314 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.280 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.219 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.406 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 1.357 INCHES MINIMUM AND 1.369 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.314 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.280 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.219 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.406 INCHES NOMINAL IN
SECOND LEG WIDTH0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
SECOND LEG LENGTH1.357 INCHES MINIMUM AND 1.369 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.290 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5340PL0713233Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 332C446P143?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 332C446P143?
332C446P143 is a BRACKET,ANGLE.
What parts can replace 332C446P143?
There is 1 known substitute for 332C446P143: 5340PL0713233. Substitute compatibility should be verified for your specific system.
What is the NSN for 332C446P143?
332C446P143 is cataloged in the U.S. Government catalog under NSN 5340-01-152-7693. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 332C446P143

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.