PartsTable
Technical Data Sheet
Download PDF

3324267 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3324267: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, temp_rating: 200.0 CELSIUS DEGC, overall_width: 8.812 INCHES NOMINAL IN, aperture_width: 7.750 INCHES NOMINAL IN, overall_length: 11.312 INCHES NOMINAL IN, aperture_length: 10.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-113-8500, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3324267
NSN: 5330-00-113-8500
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
temp_rating200.0 CELSIUS DEGC
overall_width8.812 INCHES NOMINAL IN
aperture_width7.750 INCHES NOMINAL IN
overall_length11.312 INCHES NOMINAL IN
aperture_length10.250 INCHES NOMINAL IN
hardness_rating40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
inside_corner_radius0.875 INCHES NOMINAL IN
outside_corner_radius1.406 INCHES NOMINAL IN
cross-sectional_thickness0.500 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-113-8500
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3324267 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 200.0 CELSIUS DEGC
•
CROSS-SECTIONAL THICKNESS: 0.500 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.875 INCHES NOMINAL IN
•
HARDNESS RATING: 40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS
TEMP RATING200.0 CELSIUS DEGC
CROSS-SECTIONAL THICKNESS0.500 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.875 INCHES NOMINAL IN
HARDNESS RATING40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH11.312 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH8.812 INCHES NOMINAL IN
APERTURE WIDTH7.750 INCHES NOMINAL IN
APERTURE LENGTH10.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
232928Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3324267?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3324267?
3324267 is a GASKET.
What parts can replace 3324267?
There is 1 known substitute for 3324267: 232928. Substitute compatibility should be verified for your specific system.
What is the NSN for 3324267?
3324267 is cataloged in the U.S. Government catalog under NSN 5330-00-113-8500. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3324267