PartsTable
Technical Data Sheet
Download PDF

332271 — BUSHING,SLEEVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

332271: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321 OVERALL, outside_diameter: 1.490 INCHES MINIMUM AND 1.511 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 1.246 INCHES MINIMUM AND 1.267 INCHES MAXIMUM IN, surface_treatment: SILVER OVERALL, fsc_application_data: TUBE ASSY,JET ENGINE,AIRCRAFT. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-845-3974, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
332271
NSN: 5330-00-845-3974
NIINs: 008453974, 013539011
FSC: 5330 — Packing and Gasket Materials
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 321 OVERALL
outside_diameter1.490 INCHES MINIMUM AND 1.511 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter1.246 INCHES MINIMUM AND 1.267 INCHES MAXIMUM IN
surface_treatmentSILVER OVERALL
fsc_application_dataTUBE ASSY,JET ENGINE,AIRCRAFT
cross-sectional_thickness0.117 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
cross-sectional_shape_styleHOLLOW
material_document_and_classificationAMS 5570 OR AMS 5576 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-845-3974
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 332271 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: TUBE ASSY,JET ENGINE,AIRCRAFT
•
CROSS-SECTIONAL THICKNESS: 0.117 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5570 OR AMS 5576 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: HOLLOW
•
OUTSIDE DIAMETER: 1.490 INCHES MINIMUM AND 1.511 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.246 INCHES MINIMUM AND 1.267 INCHES MAXIMUM IN
•
SURFACE TREATMENT: SILVER OVERALL
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATATUBE ASSY,JET ENGINE,AIRCRAFT
CROSS-SECTIONAL THICKNESS0.117 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5570 OR AMS 5576 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEHOLLOW
OUTSIDE DIAMETER1.490 INCHES MINIMUM AND 1.511 INCHES MAXIMUM IN
APERTURE DIAMETER1.246 INCHES MINIMUM AND 1.267 INCHES MAXIMUM IN
SURFACE TREATMENTSILVER OVERALL
MATERIALSTEEL COMP 321 OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 332271?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 332271?
332271 is a BUSHING,SLEEVE.
What is the NSN for 332271?
332271 is cataloged in the U.S. Government catalog under NSN 5330-00-845-3974. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 332271

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.