PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3322-602
3322-602 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SOCKET,SOCKET WRENCH is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_length: 2.180 INCHES MINIMUM IN, drive_end_shape: SQUARE SINGLE END INTERNAL, special_features: FORGED STEEL; BOLT CLEARANCE DIA MIN 0.765 IN. IN, style_designator: INTERNAL-INTERNAL, features_provided: MANUAL TOOL.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-910-8585, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3322-602
NSN: 5340-00-910-8585
FSC: 5340
CAGE: 90073 — CMC ELECTRONICS INC (CAN)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length2.180 INCHES MINIMUM IN
drive_end_shapeSQUARE SINGLE END INTERNAL
special_featuresFORGED STEEL; BOLT CLEARANCE DIA MIN 0.765 IN. IN
style_designatorINTERNAL-INTERNAL
features_providedMANUAL TOOL
surface_treatmentCHROMIUM OVERALL
drive_surface_size0.375 INCHES NOMINAL SINGLE END IN
wrenching_surface_size0.812 INCHES NOMINAL SINGLE END IN
wrenching_surface_shape12 POINT SINGLE END INTERNAL
nondefinitive_spec/std_data1 TYPE AND 1 CLASS AND B STYLE
specification/standard_data81343-SAE AS954 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN5340-00-910-8585
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3322-602 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROOVE WIDTH: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEFT INTERNAL THREAD
•
LEFT SLOT WIDTH: 0.063 INCHES NOMINAL IN
•
LEFT COUNTERBORE DEPTH: 0.500 INCHES NOMINAL IN
•
LEFT COUNTERBORE DIAMETER: 0.250 INCHES NOMINAL IN
•
DIAMETER: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: ROUND
•
LENGTH: 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
GROOVE WIDTH0.500 INCHES NOMINAL IN
STYLE DESIGNATORLEFT INTERNAL THREAD
LEFT SLOT WIDTH0.063 INCHES NOMINAL IN
LEFT COUNTERBORE DEPTH0.500 INCHES NOMINAL IN
LEFT COUNTERBORE DIAMETER0.250 INCHES NOMINAL IN
DIAMETER0.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEROUND
LENGTH0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN
DISTANCE FROM END TO GROOVE0.125 INCHES NOMINAL IN
GROOVE DIAMETER0.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
AS954Interchangeable
interchangeable cross-reference
interchangeable
33226-02Interchangeable
interchangeable cross-reference
interchangeable
AS954 TY1CL1STBInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3322-602?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3322-602?
3322-602 is a SOCKET,SOCKET WRENCH.
What parts can replace 3322-602?
There are 3 known substitutes for 3322-602: AS954, 33226-02, AS954 TY1CL1STB. Substitute compatibility should be verified for your specific system.
What is the NSN for 3322-602?
3322-602 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-910-8585. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3322-602

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026