PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 332-0004
332-0004 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 0.625 INCHES NOMINAL IN, first_leg_length: 0.468 INCHES NOMINAL IN, second_leg_angle: 90.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-972-1963, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
332-0004
NSN: 5340-00-972-1963
FSC: 5340
CAGE: 90073 — CMC ELECTRONICS INC (CAN)
SPECIFICATIONS
materialSTEEL
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width0.625 INCHES NOMINAL IN
first_leg_length0.468 INCHES NOMINAL IN
second_leg_angle90.0 DEGREES NOMINAL
second_leg_styleSQUARE
second_leg_width0.625 INCHES NOMINAL IN
special_featuresFIRST LEG HAS 1 SLOT 0.250 IN. LG AND 0.156 IN. W; SECOND LEG HAS ONE CUT CORNER IN
style_designatorDOUBLE ANGLE
second_leg_length0.594 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE
NSN5340-00-972-1963
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 332-0004 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.137 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE
•
CENTER SECTION WIDTH: 0.625 INCHES NOMINAL IN
•
CENTER SECTION HEIGHT: 0.312 INCHES NOMINAL IN
•
SECOND LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
FIRST LEG LENGTH: 0.468 INCHES NOMINAL IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.188 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.137 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE
CENTER SECTION WIDTH0.625 INCHES NOMINAL IN
CENTER SECTION HEIGHT0.312 INCHES NOMINAL IN
SECOND LEG HOLE ARRANGEMENT STYLETWO HOLES
FIRST LEG LENGTH0.468 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.188 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.125 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE
SECOND LEG STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
C856MCompatible
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - APN
compatible
189GXCompatible
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - MPN
compatible
223-7409Compatible
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
compatible
341-6566Compatible
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - SPN
compatible
342-4262Compatible
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - SPN
compatible
406-10691Compatible
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - SPN
compatible
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
THIS PART SUBSTITUTES FOR 14
8XX1KSUBSTITUTE
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
DELL
C856MSUBSTITUTE
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
DELL
DW979SUBSTITUTE
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
DELL
G323CSUBSTITUTE
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
DELL
X803KSUBSTITUTE
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
DELL
189GXSUBSTITUTE
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
DELL
223-7409SUBSTITUTE
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
DELL
341-6566SUBSTITUTE
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
DELL
342-4262SUBSTITUTE
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
DELL
406-10691SUBSTITUTE
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
DELL
406-BBDYSUBSTITUTE
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
DELL
406-BBGRSUBSTITUTE
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
DELL
406-BBHBSUBSTITUTE
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
DELL
6JHW6SUBSTITUTE
Dell FC 8Gb 2-Port PCI-E-2.0x8 Emulex LPe12002 Controller with FH Bracket - DPN
DELL
Ready to buy 332-0004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 332-0004?
332-0004 is a BRACKET,DOUBLE ANGLE.
What parts can replace 332-0004?
There are 12 known substitutes for 332-0004: C856M, 189GX, 223-7409 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 332-0004?
332-0004 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-972-1963. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 332-0004

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026