PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3319707-7
3319707-7 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include special_features: HEAT SHRINK WIRE WRAP., end_item_identification: C-130 AIRCRAFT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-987-3744, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3319707-7
NSN: 3110-00-987-3744
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
special_featuresHEAT SHRINK WIRE WRAP.
end_item_identificationC-130 AIRCRAFT
NSN3110-00-987-3744
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3319707-7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 7.8737 INCHES MINIMUM AND 7.8740 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 111 TYPE AND 1 CLASS
•
LUBRICATION MATERIAL: GREASE
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
INTERNAL CLEARANCE: 0.0009 INCHES MINIMUM RADIAL AND 0.00014 INCHES MAXIMUM RADIAL IN
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER7.8737 INCHES MINIMUM AND 7.8740 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA111 TYPE AND 1 CLASS
LUBRICATION MATERIALGREASE
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
CRITICALITY CODE JUSTIFICATIONZZZW
INTERNAL CLEARANCE0.0009 INCHES MINIMUM RADIAL AND 0.00014 INCHES MAXIMUM RADIAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
INTERNAL FIT-UP DESIGNATIONTIGHT
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 37
H2650-1540PC23Interchangeable
interchangeable cross-reference
interchangeable
2650-1165PC26Interchangeable
interchangeable cross-reference
interchangeable
2650-2275GP2 ITEM 52Interchangeable
interchangeable cross-reference
interchangeable
2650-2230GP1 ITEM 50Interchangeable
interchangeable cross-reference
interchangeable
405850-102AInterchangeable
interchangeable cross-reference
interchangeable
2650-1145PC19NTInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3319707-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3319707-7?
3319707-7 is a BEARING,BALL,ANNULAR.
What parts can replace 3319707-7?
There are 37 known substitutes for 3319707-7: H2650-1540PC23, 2650-1165PC26, 2650-2275GP2 ITEM 52 and 34 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3319707-7?
3319707-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-987-3744. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3319707-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026