The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_style: PLAIN, SOLID, bore_style: INVOLUTE SPLINE BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 0.8100 INCHES MINIMUM AND 0.8200 INCHES MAXIMUM IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the Federal Logistics Information System under NSN 3020-00-532-0449, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | STEEL OVERALL |
| body_style | PLAIN, SOLID |
| bore_style | INVOLUTE SPLINE BOTH ENDS |
| tooth_form | STANDARD |
| pitch_diameter | 0.8100 INCHES MINIMUM AND 0.8200 INCHES MAXIMUM IN |
| pressure_angle | 20.0000 DEGREES |
| teeth_quantity | 7 |
| spline_quantity | 12 BOTH ENDS |
| special_features | 0.451-0.455 INCH OUTSIDE DIAMETER,0.177-0.197 INCH INSIDE DIAMETER PLUG INSTALLED IN HUB END OF BORE; COUNTERBORE LOCATED SECOND END,DIAMETER 0.625 INCHES NOMINAL,DEPTH 0.230 INCHES NOMINAL IN |
| style_designator | PROTRUDING HUB, RECESSED BODY |
| attachment_method | MOUNTING HOLE |
| face_nominal_width | 0.597 INCHES IN |
| NSN | 3020-00-532-0449 |
| MOUNTING HOLE NOMINAL DIAMETER | 0.187 INCHES TRANSVERSELY THROUGH HUB FIRST END IN |
| SPECIAL FEATURES | 0.451-0.455 INCH OUTSIDE DIAMETER,0.177-0.197 INCH INSIDE DIAMETER PLUG INSTALLED IN HUB END OF BORE; COUNTERBORE LOCATED SECOND END,DIAMETER 0.625 INCHES NOMINAL,DEPTH 0.230 INCHES NOMINAL IN |
| BORE NOMINAL DIAMETER | 0.435 INCHES BOTH ENDS IN |
| BODY RECESS NOMINAL DEPTH | 0.220 INCHES SECOND END IN |
| TOOTH FORM | STANDARD |
| HUB NOMINAL DIAMETER | 0.6227 INCHES FIRST END IN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.390 INCHES FIRST END IN |
| TEETH QUANTITY | 7 |