PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3318 3
3318 3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BLADE,WINDSHIELD WIPER is a the manufacturer industrial component. Key specifications include material: STEEL ALLOY OVERALL, point_type: SPLIT, point_angle: 135.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 1.250 INCHES NOMINAL IN, overall_length: 3.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-117-4719, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3318 3
NSN: 3110-00-117-4719
FSC: 3110
CAGE: 73740 — TRW INC TRW COMMERCIAL STEERING DIV (USA)
SPECIFICATIONS
materialSTEEL ALLOY OVERALL
point_typeSPLIT
point_angle135.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length1.250 INCHES NOMINAL IN
flute_quantity2
overall_length3.750 INCHES NOMINAL IN
shank_diameter0.213 INCHES NOMINAL IN
special_featuresJOBBERS LG; SHORT FLUTE; WIRE SIZE 3
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter0.2130 INCHES IN
cutting_rotation_directionRIGHT-HAND
NSN3110-00-117-4719
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3318 3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER PIECE QUANTITY: 1
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: RETAINER AND TAPERED ROLLERS
•
BORE DIAMETER: 1.3109 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.7100 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.4375 INCHES NOMINAL IN
RETAINER PIECE QUANTITY1
SPECIAL FEATURESIN LINE,0.2200 IN. LARGEST DIA OF ROLLER,COPPER COATED RETAINER IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORRETAINER AND TAPERED ROLLERS
BORE DIAMETER1.3109 INCHES NOMINAL IN
OUTSIDE DIAMETER1.7100 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
22110158Interchangeable
interchangeable cross-reference
interchangeable
15595485Interchangeable
interchangeable cross-reference
interchangeable
E7AZ-17528-AInterchangeable
interchangeable cross-reference
interchangeable
A5000-15Interchangeable
interchangeable cross-reference
interchangeable
172MKC1Interchangeable
interchangeable cross-reference
interchangeable
W4736-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3318 3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3318 3?
3318 3 is a BLADE,WINDSHIELD WIPER.
What parts can replace 3318 3?
There are 27 known substitutes for 3318 3: 22110158, 15595485, E7AZ-17528-A and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3318 3?
3318 3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-117-4719. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3318 3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026