PartsTable
Technical Data Sheet
Download PDF

331-6406204-24 — SEAL,NONMETALLIC STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

331-6406204-24: SEAL,NONMETALLIC STRIP.

The SEAL,NONMETALLIC STRIP is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, construction: SOLID, end_cut_angle: 45.0 DEGREES, overall_length: 10.480 INCHES NOMINAL IN, style_designator: STRIP, cross-sectional_width: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-515-5505, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
331-6406204-24
NSN: 5330-01-515-5505
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
constructionSOLID
end_cut_angle45.0 DEGREES
overall_length10.480 INCHES NOMINAL IN
style_designatorSTRIP
cross-sectional_width0.250 INCHES NOMINAL IN
cross-sectional_height0.500 INCHES NOMINAL IN
end_item_identificationSEAWOLF CLASS SSN
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationMIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyVERTICAL GASKET
NSN5330-01-515-5505
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 331-6406204-24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
END CUT ANGLE: 45.0 DEGREES
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.500 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.250 INCHES NOMINAL IN
STYLE DESIGNATORSTRIP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH10.480 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
END CUT ANGLE45.0 DEGREES
PART NAME ASSIGNED BY CONTROLLING AGENCYVERTICAL GASKET
END ITEM IDENTIFICATIONSEAWOLF CLASS SSN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
331-6406204Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 331-6406204-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 331-6406204-24?
331-6406204-24 is a SEAL,NONMETALLIC STRIP.
What parts can replace 331-6406204-24?
There is 1 known substitute for 331-6406204-24: 331-6406204. Substitute compatibility should be verified for your specific system.
What is the NSN for 331-6406204-24?
331-6406204-24 is cataloged in the U.S. Government catalog under NSN 5330-01-515-5505. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 331-6406204-24