PartsTable
Technical Data Sheet
Download PDF

330858 — PARTS KIT,COMPRESSOR

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

330858: PARTS KIT,COMPRESSOR.

The PARTS KIT,COMPRESSOR is a the manufacturer industrial component. Key specifications include end_item_name: DENTAL UNIT, FIELD, PORTABLE, document_source: 66250, end_item_source: 66250, end_item_identification: 017033151, component_document_origin: INDUSTRIAL, part_name_assigned_by_controlling_agency: COMPRESSOR SUBASSEMBLY, AEU-14CF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-810-1694, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
330858
NSN: 5310-00-810-1694
NIINs: 008101694, 017296358
FSC: 5310 — Nuts and Washers
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
end_item_nameDENTAL UNIT, FIELD, PORTABLE
document_source66250
end_item_source66250
end_item_identification017033151
component_document_originINDUSTRIAL
part_name_assigned_by_controlling_agencyCOMPRESSOR SUBASSEMBLY, AEU-14CF
NSN5310-00-810-1694
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 330858 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.745 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 301 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.193 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.745 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTPASSIVATE OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 301 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.193 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
THICKNESS0.062 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
2W1C13-24-62Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1330858Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
A157Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 330858?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 330858?
330858 is a PARTS KIT,COMPRESSOR.
What parts can replace 330858?
There are 3 known substitutes for 330858: 2W1C13-24-62, 1330858, A157. Substitute compatibility should be verified for your specific system.
What is the NSN for 330858?
330858 is cataloged in the U.S. Government catalog under NSN 5310-00-810-1694. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 330858