PartsTable
Technical Data Sheet
PartsTable / MRO / 330722
330722 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SWITCH,FOOT is a the manufacturer industrial component. Key specifications include height: 2.000 INCHES NOMINAL IN, cushion: NOT INCLUDED, material: STEEL OVERALL, mounting_pad: NOT INCLUDED, closed_length: 12.000 INCHES NOMINAL IN, load_capacity: 140.0 POUNDS NOMINAL LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-132-4580, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 330722
NSN: 5340-00-132-4580
FSC: 5340
CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
height2.000 INCHES NOMINAL IN
cushionNOT INCLUDED
materialSTEEL OVERALL
mounting_padNOT INCLUDED
closed_length12.000 INCHES NOMINAL IN
load_capacity140.0 POUNDS NOMINAL LBS
overall_width1.250 INCHES NOMINAL IN
overall_length8.750 INCHES NOMINAL IN
extended_length30.000 INCHES NOMINAL IN
mounting_methodBRACKET(S) AND MOUNTING SLOTS
special_featuresMOUNTING:BRAKET OR HARD MOUNTING; HARDWARE:NUMBER 8 PAN HEAD SCREWS; DISCONNECT:FRONT DISCONNECT LEVER; LOCK-OUT HOLDS CHASSIS FULLY OPEN; LEAD-IN PINS GUIDE CHASSIS DURING REINSERTION
style_designator2 - MEMBER
NSN5340-00-132-4580
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 330722 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 7.750 INCHES NOMINAL IN
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: CURVED ARCH
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 3.000 INCHES NOMINAL IN
•
MOUNTING HOLE SIZE: 0.406 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE BETWEEN MOUNTING HOLE CENTERS7.750 INCHES NOMINAL IN
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORCURVED ARCH
DISTANCE BETWEEN BASE AND INSIDE OF ARCH3.000 INCHES NOMINAL IN
OVERALL WIDTH1.250 INCHES NOMINAL IN
OVERALL LENGTH8.750 INCHES NOMINAL IN
MOUNTING HOLE SIZE0.406 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
CUSHIONNOT INCLUDED
MATERIAL THICKNESS0.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
LL-H37-0580Interchangeable
interchangeable cross-reference
interchangeable
330722Interchangeable
interchangeable cross-reference
interchangeable
111087Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 330722?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 330722?
330722 is a SWITCH,FOOT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 330722?
There are 3 known substitutes for 330722: LL-H37-0580, 330722, 111087. Substitute compatibility should be verified for your specific system.
What is the NSN for 330722?
330722 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-132-4580. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 330722

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026