PartsTable
Technical Data Sheet
Download PDF

3305AS624-1 — LEVER,MANUAL CONTROL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3305AS624-1: LEVER,MANUAL CONTROL.

The LEVER,MANUAL CONTROL is a the manufacturer industrial component. Key specifications include width: 0.5320 INCHES NOMINAL OVERALL IN, material: STEEL COMP 630 LATCH BOLT, overall_width: 0.532 INCHES NOMINAL IN, overall_length: 2.531 INCHES NOMINAL IN, mounting_method: DRILLED HOLE, special_features: LINKLESS AMUNITION LOADER. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-436-1821, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3305AS624-1
NSN: 5340-01-436-1821
NIINs: 014361821, 014655598
FSC: 5340 — Hardware, Commercial
CAGE: 56529 — HYDRAULICS INTERNATIONAL, INC. DBA HYDRAULICS INTERNATIONAL INC (USA)
SPECIFICATIONS
width0.5320 INCHES NOMINAL OVERALL IN
materialSTEEL COMP 630 LATCH BOLT
overall_width0.532 INCHES NOMINAL IN
overall_length2.531 INCHES NOMINAL IN
mounting_methodDRILLED HOLE
special_featuresLINKLESS AMUNITION LOADER
fulcrum_bore_size0.379 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
end_item_identificationAIRCRAFT,FREEDOM FIGHTER F-5,AND F-14,16,18,22.
material_document_and_classificationAMS-5604 ASSN STD SINGLE MATERIAL RESPONSE OR AMS-5643 ASSN STD SINGLE MATERIAL RESPONSE LATCH BOLT
NSN5340-01-436-1821
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3305AS624-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS-5604 ASSN STD SINGLE MATERIAL RESPONSE OR AMS-5643 ASSN STD SINGLE MATERIAL RESPONSE LATCH BOLT
•
WIDTH: 0.5320 INCHES NOMINAL OVERALL IN
•
MATERIAL: STEEL COMP 630 LATCH BOLT
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-5604 ASSN STD SINGLE MATERIAL RESPONSE OR AMS-5643 ASSN STD SINGLE MATERIAL RESPONSE LATCH BOLT
WIDTH0.5320 INCHES NOMINAL OVERALL IN
MATERIALSTEEL COMP 630 LATCH BOLT
SUBSTITUTES & CROSS-REFERENCES 1
5340PL2199378Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3305AS624-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3305AS624-1?
3305AS624-1 is a LEVER,MANUAL CONTROL.
What parts can replace 3305AS624-1?
There is 1 known substitute for 3305AS624-1: 5340PL2199378. Substitute compatibility should be verified for your specific system.
What is the NSN for 3305AS624-1?
3305AS624-1 is cataloged in the U.S. Government catalog under NSN 5340-01-436-1821. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3305AS624-1