PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3304-662
3304-662 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1030 OVERALL, first_end_style: CHAMFERED, pin_overall_length: 2.250 INCHES NOMINAL IN, pin_overall_diameter: 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-011-7881, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3304-662
NSN: 5315-00-011-7881
FSC: 5315
CAGE: 02432 — AMERICAN LAUNDRY MACHINERY INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1030 OVERALL
first_end_styleCHAMFERED
pin_overall_length2.250 INCHES NOMINAL IN
pin_overall_diameter0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD 1ST MATERIAL RESPONSE OR SAE ASSN STD 2ND MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-011-7881
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3304-662 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL COMP 1030 OVERALL
•
PIN OVERALL LENGTH: 2.250 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD 1ST MATERIAL RESPONSE OR SAE ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL COMP 1030 OVERALL
PIN OVERALL LENGTH2.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD 1ST MATERIAL RESPONSE OR SAE ASSN STD 2ND MATERIAL RESPONSE OVERALL
FIRST END STYLECHAMFERED
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
63011-3-6691885Interchangeable
interchangeable cross-reference
interchangeable
H10369-39Interchangeable
interchangeable cross-reference
interchangeable
542-8540-002Interchangeable
interchangeable cross-reference
interchangeable
117881Interchangeable
interchangeable cross-reference
interchangeable
30298Interchangeable
interchangeable cross-reference
interchangeable
M23Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3304-662?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3304-662?
3304-662 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 3304-662?
There are 13 known substitutes for 3304-662: 63011-3-6691885, H10369-39, 542-8540-002 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3304-662?
3304-662 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-011-7881. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3304-662

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026