PartsTable
Technical Data Sheet
Download PDF

33034-0024 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

33034-0024: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.490 INCHES MINIMUM AND 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM0.510 INCHES MAXIMUM IN, length: 0.207 INCHES MINIMUM AND 0.207 INCHES MINIMUM AND 0.227 INCHES MAXIMUM0.227 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_height: 0.265 INCHES MINIMUM AND 0.265 INCHES MINIMUM AND 0.285 INCHES MAXIMUM0.285 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S)UNTHREADED HOLE(S), surface_treatment: CADMIUM AND CADMIUM AND CHROMATE OVERALLCHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-331-6416, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
33034-0024
NSN: 5340-01-331-6416
FSC: 5340 — Hardware, Commercial
CAGE: 27914 — HONEYWELL INTERNATIONAL INC DBA HONEYWELL (USA)
SPECIFICATIONS
width0.490 INCHES MINIMUM AND 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM0.510 INCHES MAXIMUM IN
length0.207 INCHES MINIMUM AND 0.207 INCHES MINIMUM AND 0.227 INCHES MAXIMUM0.227 INCHES MAXIMUM IN
materialSTEEL OVERALL
overall_height0.265 INCHES MINIMUM AND 0.265 INCHES MINIMUM AND 0.285 INCHES MAXIMUM0.285 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)UNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CADMIUM AND CHROMATE OVERALLCHROMATE OVERALL
material_thickness0.011 INCHES MINIMUM AND 0.011 INCHES MINIMUM AND 0.014 INCHES MAXIMUM0.014 INCHES MAXIMUM IN
loop/holding_dimension0.190 INCHES MINIMUM AND 0.190 INCHES MINIMUM AND 0.205 INCHES MAXIMUM0.205 INCHES MAXIMUM IN
material_document_and_classificationASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALLASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-331-6416
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 33034-0024 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.207 INCHES MINIMUM AND 0.207 INCHES MINIMUM AND 0.227 INCHES MAXIMUM0.227 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALLASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.190 INCHES MINIMUM AND 0.190 INCHES MINIMUM AND 0.205 INCHES MAXIMUM0.205 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.011 INCHES MINIMUM AND 0.011 INCHES MINIMUM AND 0.014 INCHES MAXIMUM0.014 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CADMIUM AND CHROMATE OVERALLCHROMATE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.265 INCHES MINIMUM AND 0.265 INCHES MINIMUM AND 0.285 INCHES MAXIMUM0.285 INCHES MAXIMUM IN
LENGTH0.207 INCHES MINIMUM AND 0.207 INCHES MINIMUM AND 0.227 INCHES MAXIMUM0.227 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)UNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALLASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.190 INCHES MINIMUM AND 0.190 INCHES MINIMUM AND 0.205 INCHES MAXIMUM0.205 INCHES MAXIMUM IN
MATERIAL THICKNESS0.011 INCHES MINIMUM AND 0.011 INCHES MINIMUM AND 0.014 INCHES MAXIMUM0.014 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CADMIUM AND CHROMATE OVERALLCHROMATE OVERALL
WIDTH0.490 INCHES MINIMUM AND 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM0.510 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 33034-0024?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 33034-0024?
33034-0024 is a CLIP,SPRING TENSION.
What is the NSN for 33034-0024?
33034-0024 is cataloged in the U.S. Government catalog under NSN 5340-01-331-6416. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 33034-0024

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.