PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 330330-001
330330-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COVER,ELECTRICAL CONNECTOR is a the manufacturer industrial component. Key specifications include diameter: 0.128 INCHES NOMINAL IN, material: PLASTIC, overall_width: 0.281 INCHES NOMINAL IN, special_features: COLOR-BLACK, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-224-9234, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
330330-001
NSN: 5340-00-224-9234
FSC: 5340
CAGE: 27914 — HONEYWELL INTERNATIONAL INC DBA HONEYWELL (USA)
SPECIFICATIONS
diameter0.128 INCHES NOMINAL IN
materialPLASTIC
overall_width0.281 INCHES NOMINAL IN
size_designation9
special_featuresCOLOR-BLACK
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.062 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.414 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.243 INCHES NOMINAL IN
NSN5340-00-224-9234
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 330330-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.243 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.062 INCHES NOMINAL IN
•
DIAMETER: 0.128 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.414 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
OVERALL WIDTH0.281 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.243 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.062 INCHES NOMINAL IN
DIAMETER0.128 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
DISTANCE FROM LOOP CENTER TO TONGUE END0.414 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
1162Upgraded Successor
successor cross-reference
successor
ALL AMERICANUpgraded Successor
successor cross-reference
successor
6515NCM050984Upgraded Successor
successor cross-reference
successor
99225724Interchangeable
interchangeable cross-reference
interchangeable
330330-001Interchangeable
interchangeable cross-reference
interchangeable
DCC-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 330330-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 330330-001?
330330-001 is a COVER,ELECTRICAL CONNECTOR.
What parts can replace 330330-001?
There are 11 known substitutes for 330330-001: 1162, ALL AMERICAN, 6515NCM050984 and 8 more. Substitute compatibility should be verified for your specific system.
Is 330330-001 still available?
330330-001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 330330-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026