PartsTable
Technical Data Sheet
Download PDF

3301-03810 — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

3301-03810: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include overall_length: 32.00 MILLIMETERS NOMINAL MM, special_features: FLANGE END OF ID COUNTERBORED TO 13MM MM, body_inside_diameter: 6.000 MILLIMETERS MINIMUM AND 6.018 MILLIMETERS MAXIMUM MM, body_outside_diameter: 11.941 MILLIMETERS MINIMUM AND 12.000 MILLIMETERS MAXIMUM MM, flange_outside_diameter: 15.941 MILLIMETERS MINIMUM AND 16.000 MILLIMETERS MAXIMUM MM, antirotation/lubrication_type_and_quantity: 1 HOLE. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-239-5906, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3301-03810
NSN: 3120-00-239-5906
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 61482 — BERKEL INC (USA)
SPECIFICATIONS
overall_length32.00 MILLIMETERS NOMINAL MM
special_featuresFLANGE END OF ID COUNTERBORED TO 13MM MM
body_inside_diameter6.000 MILLIMETERS MINIMUM AND 6.018 MILLIMETERS MAXIMUM MM
body_outside_diameter11.941 MILLIMETERS MINIMUM AND 12.000 MILLIMETERS MAXIMUM MM
flange_outside_diameter15.941 MILLIMETERS MINIMUM AND 16.000 MILLIMETERS MAXIMUM MM
antirotation/lubrication_type_and_quantity1 HOLE
NSN3120-00-239-5906
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 3301-03810 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE OUTSIDE DIAMETER: 15.941 MILLIMETERS MINIMUM AND 16.000 MILLIMETERS MAXIMUM MM
•
BODY OUTSIDE DIAMETER: 11.941 MILLIMETERS MINIMUM AND 12.000 MILLIMETERS MAXIMUM MM
•
BODY INSIDE DIAMETER: 6.000 MILLIMETERS MINIMUM AND 6.018 MILLIMETERS MAXIMUM MM
•
ANTIROTATION/LUBRICATION TYPE AND QUANTITY: 1 HOLE
TECHNICAL CHARACTERISTICS
FLANGE OUTSIDE DIAMETER15.941 MILLIMETERS MINIMUM AND 16.000 MILLIMETERS MAXIMUM MM
BODY OUTSIDE DIAMETER11.941 MILLIMETERS MINIMUM AND 12.000 MILLIMETERS MAXIMUM MM
OVERALL LENGTH32.00 MILLIMETERS NOMINAL MM
BODY INSIDE DIAMETER6.000 MILLIMETERS MINIMUM AND 6.018 MILLIMETERS MAXIMUM MM
SPECIAL FEATURESFLANGE END OF ID COUNTERBORED TO 13MM MM
ANTIROTATION/LUBRICATION TYPE AND QUANTITY1 HOLE
OTHER ITEMS IN FSC 3120 — Bearings, Plain, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3120-00-001-1288 3120-00-001-1835 3120-00-001-1838 3120-00-001-1928 3120-00-001-1934 3120-00-001-3933 3120-00-001-3937 3120-00-001-3938
SUBSTITUTES & CROSS-REFERENCES 1
834-5001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3301-03810?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3301-03810?
3301-03810 is a BEARING,SLEEVE.
What parts can replace 3301-03810?
There is 1 known substitute for 3301-03810: 834-5001. Substitute compatibility should be verified for your specific system.
What is the NSN for 3301-03810?
3301-03810 is cataloged in the U.S. Government catalog under NSN 3120-00-239-5906. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3301-03810