PartsTable
Technical Data Sheet
Download PDF

33002-0040 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

33002-0040: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, lug_width: 0.468 INCHES NOMINAL IN, overall_width: 0.375 INCHES NOMINAL IN, lug_hole_diameter: 0.199 INCHES NOMINAL IN, material_thickness: 0.040 INCHES NOMINAL IN, loop_inside_diameter: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-113-6265, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
33002-0040
NSN: 5340-01-113-6265
FSC: 5340 — Hardware, Commercial
CAGE: 27914 — HONEYWELL INTERNATIONAL INC DBA HONEYWELL (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
lug_width0.468 INCHES NOMINAL IN
overall_width0.375 INCHES NOMINAL IN
lug_hole_diameter0.199 INCHES NOMINAL IN
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.312 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.702 INCHES NOMINAL IN
distance_from_outer_edge_of_lug_to_hole_center0.234 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_lug_hole0.515 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.484 INCHES NOMINAL IN
NSN5340-01-113-6265
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 33002-0040 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG HOLE DIAMETER: 0.199 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 0.515 INCHES NOMINAL IN
•
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER: 0.234 INCHES NOMINAL IN
•
DIAMETER: 0.199 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
LUG WIDTH: 0.468 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.702 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER0.199 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE0.515 INCHES NOMINAL IN
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER0.234 INCHES NOMINAL IN
DIAMETER0.199 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
LUG WIDTH0.468 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.702 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.484 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.312 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 33002-0040?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 33002-0040?
33002-0040 is a CLAMP,LOOP.
What is the NSN for 33002-0040?
33002-0040 is cataloged in the U.S. Government catalog under NSN 5340-01-113-6265. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 33002-0040

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.