Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW
The Iomega® REV™ 35GB/90GB SCSI External drive is a revolutionary removable hard disk system which is more efficient and reliable than traditional tape systems, while providing portable, high-performance file storage. Back up and restore up to 8 times faster than tape, access files in seconds with drag-and-drop, and secure your data with password protection. Includes Iomega Automatic Backup Pro software for “set-it and forget-it” file backups, plus full system backup and fast disaster recovery software.
This part is cataloged in the Federal Logistics Information System under NSN 5910-00-126-9179, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
MRO→MRO_GENERAL→3300-9
NSN:5910-00-126-9179 FSC:5910 CAGE:72598 — GAROD RADIO CORP
SPECIFICATIONS
material
PLASTIC BOARD
body_style
BARRIER TYPE
body_width
1.000 INCHES NOMINAL IN
bore_style
W/ KEYWAY BOTH ENDS
teeth_type
SINGLE HELIX
tooth_form
STANDARD
body_height
0.875 INCHES NOMINAL IN
body_length
1.812 INCHES NOMINAL IN
head_weight
2.500 POUNDS LBS
helix_angle
45.0000 DEGREES
handle_length
15.000 INCHES NOMINAL IN
pitch_diameter
2.0000 INCHES NOMINAL IN
NSN
5910-00-126-9179
COMPONENT DIAGRAM
KEY FEATURES
•
TERMINAL SURFACE TREATMENT: SOLDER
•
INSULATION RESISTANCE AT REFERENCE TEMP: 6000.0 MEGOHMS
•
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT: 1.000
•
TERMINAL TYPE AND QUANTITY: 3 TAB, SOLDER LUG
•
TEST DATA DOCUMENT: 81349-MIL-C-25 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP: 20.0 MEGOHM-MICROFARADS
•
TOLERANCE RANGE PER SECTION: -10.00 TO 20.00 PERCENT 1ST SECTION AND -10.00 TO 20.00 PERCENT 2ND SECTION
•
BODY HEIGHT: 0.875 INCHES NOMINAL IN
TYPICAL APPLICATIONS
RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
TERMINAL SURFACE TREATMENT
SOLDER
INSULATION RESISTANCE AT REFERENCE TEMP
6000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT
1.000
TERMINAL TYPE AND QUANTITY
3 TAB, SOLDER LUG
TEST DATA DOCUMENT
81349-MIL-C-25 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP
20.0 MEGOHM-MICROFARADS
TOLERANCE RANGE PER SECTION
-10.00 TO 20.00 PERCENT 1ST SECTION AND -10.00 TO 20.00 PERCENT 2ND SECTION
BODY HEIGHT
0.875 INCHES NOMINAL IN
FEATURES PROVIDED
HERMETICALLY SEALED CASE
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3300-9?
3300-9 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by Iomega. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3300-9?
There are 18 known substitutes for 3300-9: 3687404C1, 84H 01104, GGG-H-86 and 15 more. Substitute compatibility should be verified for your specific system.
Is 3300-9 still available?
3300-9 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.