PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 33-206
33-206 ✓ Verified by PartsTable
Iomega · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CYLINDER,HYDRAULIC BRAKE,WHEEL is a Iomega industrial component. Key specifications include height: 0.380 INCHES NOMINAL IN, diameter: 1.427 INCHES MINIMUM AND 1.437 INCHES MAXIMUM IN, material: STEEL OVERALL, cup_width: 19.5 MILLIMETERS NOMINAL19.5 MILLIMETERS NOMINAL MM, thickness: 0.062 INCHES NOMINAL IN, bore_shape: STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-075-3498, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
33-206
NSN: 5340-00-075-3498
FSC: 5340
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
height0.380 INCHES NOMINAL IN
diameter1.427 INCHES MINIMUM AND 1.437 INCHES MAXIMUM IN
materialSTEEL OVERALL
cup_width19.5 MILLIMETERS NOMINAL19.5 MILLIMETERS NOMINAL MM
thickness0.062 INCHES NOMINAL IN
bore_shapeSTRAIGHT
cone_width25.0 MILLIMETERS NOMINAL25.0 MILLIMETERS NOMINAL MM
head_stylePAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
temp_rating-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
bore_diameter30.0 MILLIMETERS NOMINAL30.0 MILLIMETERS NOMINAL MM
hole_diameter0.281 INCHES NOMINAL IN
inside_length1.120 INCHES NOMINAL IN
NSN5340-00-075-3498
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 33-206 MFR: Iomega ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE LENGTH: 1.120 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 4130
•
SURFACE TREATMENT: CADMIUM AND CHROMATE
•
PAINTED FEATURE: NOT INCLUDED
•
OUTSIDE WIDTH: 1.320 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE LENGTH1.120 INCHES NOMINAL IN
MATERIALSTEEL COMP 4130
SURFACE TREATMENTCADMIUM AND CHROMATE
PAINTED FEATURENOT INCLUDED
OVERALL LENGTH1.370 INCHES NOMINAL IN
OUTSIDE WIDTH1.320 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
NJ307Interchangeable
interchangeable cross-reference
interchangeable
MR1307ELInterchangeable
interchangeable cross-reference
interchangeable
NJM35Interchangeable
interchangeable cross-reference
interchangeable
33-206Interchangeable
Screw,wood 10
interchangeable
125003Interchangeable
Screw,wood 10
interchangeable
NAS1382-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 33-206?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 33-206?
33-206 is a CYLINDER,HYDRAULIC BRAKE,WHEEL manufactured by Iomega.
What parts can replace 33-206?
There are 20 known substitutes for 33-206: NJ307, MR1307EL, NJM35 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 33-206?
33-206 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-075-3498. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 33-206

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026