33-085505-01: 33-085505-01.
The 33-085505-01 is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, construction: ONE-PIECE, hole_diameter: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN, overall_width: 3.595 INCHES MINIMUM AND 3.605 INCHES MAXIMUM IN, overall_length: 3.595 INCHES MINIMUM AND 3.605 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR W/BOLT HOLES. This part is cataloged in the U.S.
Government catalog under NSN 5365-01-271-6911, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY 6061 |
| construction | ONE-PIECE |
| hole_diameter | 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN |
| overall_width | 3.595 INCHES MINIMUM AND 3.605 INCHES MAXIMUM IN |
| overall_length | 3.595 INCHES MINIMUM AND 3.605 INCHES MAXIMUM IN |
| style_designator | NON-CIRCULAR W/BOLT HOLES |
| aperture_diameter | 1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN |
| features_provided | NONSEPARABLE |
| surface_treatment | CHROMATE |
| bolt_hole_quantity | 8 |
| material_document_and_classification | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| surface_treatment_document_and_classification | MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE A |
| NSN | 5365-01-271-6911 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE A |
| STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| OVERALL LENGTH | 3.595 INCHES MINIMUM AND 3.605 INCHES MAXIMUM IN |
| OVERALL WIDTH | 3.595 INCHES MINIMUM AND 3.605 INCHES MAXIMUM IN |
| APERTURE DIAMETER | 1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN |
| FEATURES PROVIDED | NONSEPARABLE |
| BOLT HOLE QUANTITY | 8 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.190 INCHES MINIMUM AND 3.210 INCHES MAXIMUM IN |
| SPECIAL FEATURES | FOUR ADDITIONAL APERTURES ARE LOCATED ON THE SHIM ONE 1N EACH CORNER AT 0.730 IN. MIN.-0.750 IN. MAX. FROM THE EDGE ON BOTH THE LENGTH AND WIDTH SIDES AND ARE THE SAME SIZE AS THE CENTER APERTURE; ADDITIONALLY FOUR BOLT HOLES ARE CENTERED ONE ON EACH SIDE AT 1.790 IN. MIN.-1-810 IN. MAX.FROM EACH EDGE AND 0.590 IN. MIN.-0.610 IN. MAX. IN FROM THE CORRESPONDING EDGE; ALL MEASUREMENTS INDICATE HOLE CENTERS IN |
No substitute or cross-reference records for this part.