PartsTable
Technical Data Sheet
Download PDF

32Z114-D1 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

32Z114-D1: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.625 INCHES MINIMUM IN, style_designator: CURVED ARCH, mounting_hole_size: 0.219 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-171-4037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
32Z114-D1
NSN: 5340-01-171-4037
FSC: 5340 — Hardware, Commercial
CAGE: 27315 — MORRIS MATERIAL HANDLING, INC. (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.625 INCHES MINIMUM IN
style_designatorCURVED ARCH
mounting_hole_size0.219 INCHES NOMINAL IN
inside_diameter/arch_length0.375 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole0.531 INCHES MINIMUM IN
NSN5340-01-171-4037
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 32Z114-D1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.219 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: CURVED ARCH
•
CUSHION: NOT INCLUDED
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE: 0.531 INCHES MINIMUM IN
•
INSIDE DIAMETER/ARCH LENGTH: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.219 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORCURVED ARCH
OVERALL WIDTH0.625 INCHES MINIMUM IN
CUSHIONNOT INCLUDED
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE0.531 INCHES MINIMUM IN
INSIDE DIAMETER/ARCH LENGTH0.375 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 32Z114-D1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 32Z114-D1?
32Z114-D1 is a STRAP,RETAINING.
What is the NSN for 32Z114-D1?
32Z114-D1 is cataloged in the U.S. Government catalog under NSN 5340-01-171-4037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 32Z114-D1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.