PartsTable
Technical Data Sheet
PartsTable / O-RING / 3296-038
3296-038 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ADJUSTOR,FUEL COMPONENT,ENGINE is a the manufacturer industrial component. Key specifications include fsc_application_data: ACFT ENGINE FUEL SYSTEM, end_item_identification: ACFT ENGINE TF34, criticality_code_justification: AGAV, general_characteristics_item_description: METAL NITRIDE SURFACE FINISH,0.585 IN.LG,0.205 IN.W,LEFT HAND THREAD0.343 IN.DEEP IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-013-7784, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3296-038
NSN: 5331-00-013-7784
FSC: 5331 — O-RING
CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
fsc_application_dataACFT ENGINE FUEL SYSTEM
end_item_identificationACFT ENGINE TF34
criticality_code_justificationAGAV
general_characteristics_item_descriptionMETAL NITRIDE SURFACE FINISH,0.585 IN.LG,0.205 IN.W,LEFT HAND THREAD0.343 IN.DEEP IN
NSN5331-00-013-7784
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3296-038 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
OUTSIDE DIAMETER: 1.554 INCHES MINIMUM AND 1.594 INCHES MAXIMUM IN
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM IN
•
CENTER HOLE DIAMETER: 1.290 INCHES MINIMUM AND 1.302 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE331 MAXIMUM
OUTSIDE DIAMETER1.554 INCHES MINIMUM AND 1.594 INCHES MAXIMUM IN
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM IN
CENTER HOLE DIAMETER1.290 INCHES MINIMUM AND 1.302 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
903509C1Interchangeable
interchangeable cross-reference
interchangeable
2-219V1226-75Interchangeable
interchangeable cross-reference
interchangeable
AS568-219Interchangeable
interchangeable cross-reference
interchangeable
2-219N552-90Interchangeable
interchangeable cross-reference
interchangeable
2-219N552-9Interchangeable
interchangeable cross-reference
interchangeable
39-685Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3296-038?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3296-038?
3296-038 is a ADJUSTOR,FUEL COMPONENT,ENGINE.
What parts can replace 3296-038?
There are 26 known substitutes for 3296-038: 903509C1, 2-219V1226-75, AS568-219 and 23 more. Substitute compatibility should be verified for your specific system.
Is 3296-038 still available?
3296-038 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3296-038

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026