328131: WASHER,FLAT.
The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1060 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1070 OVERALL, thickness: 0.115 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN, hole_diameter: 0.812 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN, heat_treatment: QUENCHED AND TEMPERED, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM, overall_diameter: 1.560 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5330-00-948-7121, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 1060 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1070 OVERALL |
| thickness | 0.115 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN |
| hole_diameter | 0.812 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN |
| heat_treatment | QUENCHED AND TEMPERED |
| hardness_rating | 40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM |
| overall_diameter | 1.560 INCHES NOMINAL IN |
| surface_treatment | ZINC AND CHROMATE OVERALL |
| peripheral_shape_style | ROUND |
| center_hole_shape_style | ROUND |
| cross-sectional_shape_style | RECTANGULAR |
| material_document_and_classification | SAE ASSN STD ALL MATERIAL RESPONSES OVERALL |
| surface_treatment_document_and_classification | 4342-M,FSCM 11862 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| NSN | 5330-00-948-7121 |
| FSC APPLICATION DATA | GAS TURBINE ENGINE |
| CROSS-SECTIONAL THICKNESS | 0.032 INCHES NOMINAL IN |
| STYLE DESIGNATOR | NON-CIRCULAR |
| OVERALL LENGTH | 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN |
| CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| OVERALL WIDTH | 1.850 INCHES MINIMUM AND 1.910 INCHES MAXIMUM IN |
| APERTURE WIDTH | 1.480 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN |
| APERTURE LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN |
| BOLT HOLE QUANTITY | 4 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN |
No substitute or cross-reference records for this part.