PartsTable
Technical Data Sheet
Download PDF

32813-2.5IN NON-ASBESTOS — 32813-2.5IN NON-ASBESTOS

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

32813-2.5IN NON-ASBESTOS: 32813-2.5IN NON-ASBESTOS.

The 32813-2.5IN NON-ASBESTOS is a the manufacturer industrial component. This part is cataloged in the U.S. Government catalog under NSN 4820-01-455-1665, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
32813-2.5IN NON-ASBESTOS
NSN: 4820-01-455-1665
FSC: 4820 — Valves, Nonpowered
CAGE: 14959 — CRANE CO DIV VALVE DIV (USA)
SPECIFICATIONS
Part Number32813-2.5IN NON-ASBESTOS
NSN4820-01-455-1665
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 32813-2.5IN NON-ASBESTOS · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: DISK
•
FLANGE SHAPE: ROUND WITH HOLES ALL ENDS
•
FLANGE FACE DESIGN: RAISED STRAIGHT ALL ENDS
•
BOLT CIRCLE NOMINAL DIAMETER: 5.500 INCHES ALL ENDS IN
•
CONNECTION TYPE: FLANGE ALL ENDS
•
STYLE DESIGNATOR: STRAIGHT THRU FLANGED ENDS
•
BOLT HOLE NOMINAL DIAMETER: 0.750 INCHES ALL ENDS IN
•
OPERATING PRESSURE: 450.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICEDISK
FLANGE SHAPEROUND WITH HOLES ALL ENDS
FLANGE FACE DESIGNRAISED STRAIGHT ALL ENDS
BOLT CIRCLE NOMINAL DIAMETER5.500 INCHES ALL ENDS IN
CONNECTION TYPEFLANGE ALL ENDS
STYLE DESIGNATORSTRAIGHT THRU FLANGED ENDS
BOLT HOLE NOMINAL DIAMETER0.750 INCHES ALL ENDS IN
OPERATING PRESSURE450.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
VALVE SIZE2.500 INCHES IN
BONNET TYPEOUTSIDE SCREW-YOKE
SUBSTITUTES & CROSS-REFERENCES 3
32813Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
B-104913Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
143XR-2.5INSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 32813-2.5IN NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 32813-2.5IN NON-ASBESTOS?
32813-2.5IN NON-ASBESTOS is a 32813-2.5IN NON-ASBESTOS.
What parts can replace 32813-2.5IN NON-ASBESTOS?
There are 3 known substitutes for 32813-2.5IN NON-ASBESTOS: 32813, B-104913, 143XR-2.5IN. Substitute compatibility should be verified for your specific system.
What is the NSN for 32813-2.5IN NON-ASBESTOS?
32813-2.5IN NON-ASBESTOS is cataloged in the U.S. Government catalog under NSN 4820-01-455-1665. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 32813-2.5IN NON-ASBESTOS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.