PartsTable
Technical Data Sheet
Download PDF

3281117 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3281117: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING BAND, lug_width: 0.990 INCHES MINIMUM AND 1.050 INCHES MAXIMUM IN, overall_width: 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN, style_designator: CLAMP & BRACKET, lug_hole_diameter: 0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-817-2413, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3281117
NSN: 5340-00-817-2413
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING BAND
lug_width0.990 INCHES MINIMUM AND 1.050 INCHES MAXIMUM IN
overall_width0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
style_designatorCLAMP & BRACKET
lug_hole_diameter0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
surface_treatmentPASSIVATE BAND
loop_inside_diameter0.375 INCHES NOMINAL IN
fastening_device_typeSTUD TURNLOCK
distance_from_loop_center_to_tongue_end1.020 INCHES NOMINAL IN
center_to_center_distance_between_first_and_second_holes0.770 INCHES MINIMUM AND 0.830 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.600 INCHES NOMINAL IN
NSN5340-00-817-2413
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3281117 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG HOLE DIAMETER: 0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
•
FASTENING DEVICE TYPE: STUD TURNLOCK
•
STYLE DESIGNATOR: CLAMP & BRACKET
•
LUG WIDTH: 0.990 INCHES MINIMUM AND 1.050 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.020 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 0.770 INCHES MINIMUM AND 0.830 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE BAND
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
FASTENING DEVICE TYPESTUD TURNLOCK
STYLE DESIGNATORCLAMP & BRACKET
OVERALL WIDTH0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
LUG WIDTH0.990 INCHES MINIMUM AND 1.050 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.020 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES0.770 INCHES MINIMUM AND 0.830 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.600 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3281117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3281117?
3281117 is a CLAMP,LOOP.
What is the NSN for 3281117?
3281117 is cataloged in the U.S. Government catalog under NSN 5340-00-817-2413. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3281117