PartsTable
Technical Data Sheet
Download PDF

327-S-2 — METER,ELECTRICAL FREQUENCY

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

327-S-2: METER,ELECTRICAL FREQUENCY.

The METER,ELECTRICAL FREQUENCY is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP 4145 OR STEEL COMP 8640 OR STEEL COMP 8645 OVERALL, thread_class: 3A A, movement_type: VIBRATING REED, thread_length: 2.500 INCHES MINIMUM AND 3.375 INCHES MAXIMUM IN, indicator_type: VIBRATING REED, overall_length: 2.880 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-752-1858, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
327-S-2
NSN: 5306-00-752-1858
NIINs: 007521858, 011620660
FSC: 5306 — Bolts
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP 4145 OR STEEL COMP 8640 OR STEEL COMP 8645 OVERALL
thread_class3A A
movement_typeVIBRATING REED
thread_length2.500 INCHES MINIMUM AND 3.375 INCHES MAXIMUM IN
indicator_typeVIBRATING REED
overall_length2.880 INCHES NOMINAL IN
hardness_rating28.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL
overall_diameter3.500 INCHES NOMINAL IN
special_featuresCHAMFER 1/16 IN. BY 45 DEG ON BOTH LEGS IN
style_designatorROUND FLUSH MTG
thread_directionRIGHT-HAND
measurement_range+57.0 TO 63.0 HERTZ SINGLE INDICATOR SINGLE RANGE
NSN5306-00-752-1858
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 327-S-2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DISTANCE BETWEEN SHANKS: 2.562 INCHES NOMINAL IN
•
THREAD LENGTH: 2.500 INCHES MINIMUM AND 3.375 INCHES MAXIMUM IN
•
HARDNESS RATING: 28.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL
•
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END: 11.875 INCHES MINIMUM AND 12.750 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SQUARE BEND
•
NOMINAL THREAD DIAMETER: 0.750 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
INSIDE DISTANCE BETWEEN SHANKS2.562 INCHES NOMINAL IN
THREAD LENGTH2.500 INCHES MINIMUM AND 3.375 INCHES MAXIMUM IN
HARDNESS RATING28.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END11.875 INCHES MINIMUM AND 12.750 INCHES MAXIMUM IN
STYLE DESIGNATORSQUARE BEND
NOMINAL THREAD DIAMETER0.750 INCHES IN
THREAD DIRECTIONRIGHT-HAND
SPECIAL FEATURESCHAMFER 1/16 IN. BY 45 DEG ON BOTH LEGS IN
THREAD CLASS3A A
THREAD QUANTITY PER INCH16
SUBSTITUTES & CROSS-REFERENCES 2
913150Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
5306007521858Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 327-S-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 327-S-2?
327-S-2 is a METER,ELECTRICAL FREQUENCY.
What parts can replace 327-S-2?
There are 2 known substitutes for 327-S-2: 913150, 5306007521858. Substitute compatibility should be verified for your specific system.
What is the NSN for 327-S-2?
327-S-2 is cataloged in the U.S. Government catalog under NSN 5306-00-752-1858. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 327-S-2