PartsTable
Technical Data Sheet
Download PDF

326754-2 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

326754-2: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.740 INCHES NOMINAL IN, length: 0.470 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.117 INCHES NOMINAL IN, overall_height: 0.660 INCHES NOMINAL IN, prong/lip_length: 0.040 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-958-8711, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
326754-2
NSN: 5340-00-958-8711
FSC: 5340 — Hardware, Commercial
CAGE: 54X10 — RAYTHEON COMPANY (USA)
SPECIFICATIONS
width0.740 INCHES NOMINAL IN
length0.470 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.117 INCHES NOMINAL IN
overall_height0.660 INCHES NOMINAL IN
prong/lip_length0.040 INCHES NOMINAL IN
special_featuresTW0 PART ITEM,LEFT HAND PART AS DESCRIBED,RIGHT HAND PART OPPOSITE
material_thickness0.020 INCHES NOMINAL IN
NSN5340-00-958-8711
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 326754-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.470 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
PRONG/LIP LENGTH: 0.040 INCHES NOMINAL IN
•
WIDTH: 0.740 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.117 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.660 INCHES NOMINAL IN
LENGTH0.470 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
PRONG/LIP LENGTH0.040 INCHES NOMINAL IN
SPECIAL FEATURESTW0 PART ITEM,LEFT HAND PART AS DESCRIBED,RIGHT HAND PART OPPOSITE
WIDTH0.740 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.117 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
201925-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 326754-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 326754-2?
326754-2 is a CLIP,SPRING TENSION.
What parts can replace 326754-2?
There is 1 known substitute for 326754-2: 201925-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 326754-2?
326754-2 is cataloged in the U.S. Government catalog under NSN 5340-00-958-8711. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 326754-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.