32675: REFILL GUN,FLUID.
Tests every stage of a HDMI signal’s path including cable quality Generate HDMI 2.0 4K@60Hz signals to test display compatibility Detect HDMI signal information such as resolutions and HDCP versions Compact, portable design, great for field based installers 2 Year warranty The Lindy HDMI 2.0 18G Signal Analyser and Generator is a reliable tool for testing all stages of a HDMI signals path. This device provides a simple and reliable installation of HDMI AV equipment, ensuring a high quality HDMI experience for both commercial and residential end users. The device’s pattern generator provides three HDMI video patterns up to 4K@60Hz with additional support for high dynamic range and the ability to adjust colour depths, allowing an installer to test a connected displays maximum resolution and resolve any issues at the display side of the installation.
The tester’s ‘Sink’ mode detects the signal itself from the source device and supplies valuable information This part is cataloged in the U.S. Government catalog under NSN 4730-00-497-4244, indicating validated use in U.S. government and defense logistics supply chains.
| overall_depth | 0.500 INCHES NOMINAL IN |
| inside_diameter | 0.272 INCHES MINIMUM AND 0.274 INCHES MAXIMUM IN |
| outside_diameter | 0.875 INCHES NOMINAL IN |
| screw_drive_type | CROSS RECESS TYPE 11 OR HEXAGON SOCKET |
| style_designator | ROUND |
| attachment_method | SETSCREWS |
| overall_thickness | 0.500 INCHES NOMINAL IN |
| nominal_thread_size | 0.138 INCHES SCREW HOLE IN |
| setscrew_hole_quantity | 2 |
| thread_quantity_per_inch | 32 SCREW HOLE |
| thread_series_designator | UNIFIED NATIONAL COARSE (UNC) SCREW HOLE |
| shaft_accommodation_style | ROUND |
| NSN | 4730-00-497-4244 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CONNECTION STYLE | PRESSURE SEAL FLARED |
| TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.125 INCHES NOMINAL IN |
| STYLE DESIGNATOR | CAP, TUBE, FLARED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| THREAD DIRECTION | RIGHT-HAND INTERNAL |
| NOMINAL THREAD SIZE | 0.312 INCHES INTERNAL IN |
| SEAT ANGLE | 37.0 DEGREES |
| SURFACE TREATMENT | ANODIZE OVERALL |
| THREAD CLASS | 3B INTERNAL |