PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 32631
32631 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CUTTER,MILLING,METAL SLITTING is a the manufacturer industrial component. Key specifications include face_width: 0.125 INCHES NOMINAL IN, outside_diameter: 8.000 INCHES NOMINAL IN, special_features: 58 TEETH, tooth_arrangement: STRAIGHT, mounting_hole_diameter: 1.000 INCHES NOMINAL IN, side_chip_clearance_feature: NOT INCLUDED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-689-3945, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
32631
NSN: 5330-00-689-3945
FSC: 5330
CAGE: 35211 — LAUSON DIVISION OF TECUMSEH PRODUCTS CO (USA)
SPECIFICATIONS
face_width0.125 INCHES NOMINAL IN
outside_diameter8.000 INCHES NOMINAL IN
special_features58 TEETH
tooth_arrangementSTRAIGHT
mounting_hole_diameter1.000 INCHES NOMINAL IN
side_chip_clearance_featureNOT INCLUDED
NSN5330-00-689-3945
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 32631 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
NAS965 TYBSZ19Interchangeable
interchangeable cross-reference
interchangeable
211-1660Interchangeable
interchangeable cross-reference
interchangeable
NAS965Interchangeable
interchangeable cross-reference
interchangeable
45564Interchangeable
interchangeable cross-reference
interchangeable
326-31Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 32631?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 32631?
32631 is a CUTTER,MILLING,METAL SLITTING.
What parts can replace 32631?
There are 5 known substitutes for 32631: NAS965 TYBSZ19, 211-1660, NAS965 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 32631?
32631 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-689-3945. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 32631

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026