PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 325SD1
325SD1 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 30.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF, exterior_color: RED, connection_type: THREADED EXTERNAL PIPE FIRST END, inside_diameter: 0.240 INCHES NOMINAL IN, connection_style: INVERTED FLARE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-368-8286, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
325SD1
NSN: 4720-00-368-8286
FSC: 4720
CAGE: 61820 — UNIPRESS CORPORATION (USA)
SPECIFICATIONS
seat_angle30.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
exterior_colorRED
connection_typeTHREADED EXTERNAL PIPE FIRST END
inside_diameter0.240 INCHES NOMINAL IN
connection_styleINVERTED FLARE FIRST END
outside_diameter0.390 INCHES NOMINAL IN
special_featuresFURNISHED W/ONE ADAPTE ST,THD 0.25-18 NPT INT AND EXT
thread_directionRIGHT-HAND FIRST END
burst_test_pressure2000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.250 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
NSN4720-00-368-8286
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 325SD1 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: NPT FIRST END
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
MINIMUM INSIDE BENDING RADIUS: 1.500 INCHES IN
•
HYDROSTATIC TEST PRESSURE: 1000.0 POUNDS PER SQUARE INCH LBS
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
EXTERIOR COLOR: RED
•
INSIDE DIAMETER: 0.240 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORNPT FIRST END
THREAD DIRECTIONRIGHT-HAND FIRST END
MINIMUM INSIDE BENDING RADIUS1.500 INCHES IN
HYDROSTATIC TEST PRESSURE1000.0 POUNDS PER SQUARE INCH LBS
SPECIAL FEATURESFURNISHED W/ONE ADAPTE ST,THD 0.25-18 NPT INT AND EXT
END CONNECTION DESIGNSTRAIGHT FIRST END
EXTERIOR COLORRED
INSIDE DIAMETER0.240 INCHES NOMINAL IN
CONNECTION STYLEINVERTED FLARE FIRST END
CONNECTION TYPETHREADED EXTERNAL PIPE FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
SW1242Interchangeable
interchangeable cross-reference
interchangeable
836-13Interchangeable
interchangeable cross-reference
interchangeable
30486Interchangeable
interchangeable cross-reference
interchangeable
030486Interchangeable
interchangeable cross-reference
interchangeable
30487 AND 204084Interchangeable
interchangeable cross-reference
interchangeable
50269-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 325SD1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 325SD1?
325SD1 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 325SD1?
There are 7 known substitutes for 325SD1: SW1242, 836-13, 30486 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 325SD1?
325SD1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-368-8286. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 325SD1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026