PartsTable
Technical Data Sheet
Download PDF

325H432-1 — BOOT,DUST AND MOISTURE SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

325H432-1: BOOT,DUST AND MOISTURE SEAL.

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: RUBBER BODY, base_width: 1.111 INCHES NOMINAL IN, dome_height: 0.870 INCHES NOMINAL IN, overall_height: 1.530 INCHES NOMINAL IN, mounting_method: PLATE, style_designator: CLOSED END. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-067-5861, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
325H432-1
NSN: 5340-00-067-5861
FSC: 5340 — Hardware, Commercial
CAGE: 54011 — DECIMAL INDUSTRIES INC. (USA)
SPECIFICATIONS
materialRUBBER BODY
base_width1.111 INCHES NOMINAL IN
dome_height0.870 INCHES NOMINAL IN
overall_height1.530 INCHES NOMINAL IN
mounting_methodPLATE
style_designatorCLOSED END
base_overall_length0.774 INCHES NOMINAL IN
base_inside_diameter0.750 INCHES NOMINAL IN
fsc_application_dataELECTRICAL CONNECTOR
body_outside_diameter0.758 INCHES NOMINAL IN
mounting_device_quantity2
NSN5340-00-067-5861
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 325H432-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DOME HEIGHT: 0.870 INCHES NOMINAL IN
•
FSC APPLICATION DATA: ELECTRICAL CONNECTOR
•
BODY OUTSIDE DIAMETER: 0.758 INCHES NOMINAL IN
•
MOUNTING METHOD: PLATE
•
STYLE DESIGNATOR: CLOSED END
•
BASE OVERALL LENGTH: 0.774 INCHES NOMINAL IN
•
MOUNTING DEVICE QUANTITY: 2
TECHNICAL CHARACTERISTICS
DOME HEIGHT0.870 INCHES NOMINAL IN
OVERALL HEIGHT1.530 INCHES NOMINAL IN
FSC APPLICATION DATAELECTRICAL CONNECTOR
BODY OUTSIDE DIAMETER0.758 INCHES NOMINAL IN
MOUNTING METHODPLATE
STYLE DESIGNATORCLOSED END
BASE OVERALL LENGTH0.774 INCHES NOMINAL IN
MOUNTING DEVICE QUANTITY2
BASE WIDTH1.111 INCHES NOMINAL IN
BASE INSIDE DIAMETER0.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
459194-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
867184-0014Reference document
Same NSN cross-reference
Reference document — Secondary reference
967912-2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
739107-02Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
214A321-5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 325H432-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 325H432-1?
325H432-1 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace 325H432-1?
There are 5 known substitutes for 325H432-1: 459194-2, 867184-0014, 967912-2 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 325H432-1?
325H432-1 is cataloged in the U.S. Government catalog under NSN 5340-00-067-5861. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 325H432-1